JomGorg

EGR Delete for 1986-1995 Ford F150 F250 2.8L 4.9L 5.0L 5.8L 7.5L Bronco EGR Simulator Eliminator Delete

$59.99
Shipping calculated at checkout.
Size: Pickup

Please select Mustang or pickup/Bronco before purchase

Fits for:
1986-1995 Ford F150 F250 Bronco 2.8L 4.9L 5.0L 5.8L 7.5L
1986-1995 Ford Mustang 5.0 / 2.3L


Description

isconnect your stock EGR valve and breathe life into your motor, while keeping your check engine light off, but active for future problems! This is an EGR valve simulator, which plugs into the stock EGR wiring harness providing the ECU with a closed status; thus keeping the annoying CHECK ENGINE light off and available for other problem codes. Factory locking connector design plugs directly into the stock wiring harness.

EGR = Exhaust Gas Recirculation. This device prevents the engine from re-burning exhaust gases. Hence, the engine is always burning fresh fuel and air, thus making more power. It does not have any adverse effects on the motor, it actually helps by not allowing burned exhaust gasses back into the motor.

Installation Instructions:
1. Disconnect wiring harness from EGR valve sensor and assure that connector is
clean and not corroded. Dielectric grease inside the connector is normal and
should not be removed.
2. Firmly insert the EGR Eliminator into the wiring harness until locking tab locks to
assure a good connection. Using electrical tape or a zip tie, secure the EGR
Eliminator and wiring harness to a solid object, such as a nearby wiring harness
to prevent the EGR Eliminator from bouncing and creating a bad connection in
the future.
3. Start the vehicle and check to assure the CEL (Check Engine Light) is not
illuminated. If the EGR Eliminator has a bad connection or has not been properly
installed, the CEL light should immediately illuminate upon start-up and remain
on.
NOTE: After the EGR Eliminator is installed, when checking computer codes it is normal
to receive a code 33 / 332. Although this code exists, it will not trigger the CEL unless
other codes are also present.
WARNING: This device is intended for off-road / race track use only and federal law
prohibits removal or disabling any emission control device on any emission applicable
vehicle.
This is NOT an EGR defeat device, this device does not disable the EGR functions. It is
connected to the wiring harness to keep the check engine light off, yet remain functional
for other check engine light problems in off-road /race track applications, where EGR is
not applicable. The purchaser (end user) bears full responsibility for any decisions made
upon the end use of this item and all consequential liabilities thereof.

In addition, we are looking for long-term cooperative auto parts agents. We are mainly engaged in auto parts of American models, lawn mower parts, ATV, UTV parts, RV parts, ship parts and tool goods. If you need other products, please contact us and we will give you unexpected prices.

Shipping & Returns

RETURN POLICY - 45-DAY RETURN & REFUND GUARANTEE

At egrperformance, we strive for your complete satisfaction with every purchase. If you are not entirely satisfied, you may return any unused product within 45 days of the delivery date for a full refund. Kindly ensure that the item remains in the same condition as when you initially received it.

To facilitate a seamless return process, kindly adhere to the following guidelines:

1. Original Packaging: Ensure returned items are enclosed in their original packaging, including all boxes, plastic containers, bags, and equivalent protective materials.

2. Undamaged Condition: We cannot accept original packaging that has been damaged, as these items are no longer considered new.

3. Tags and Additional Components: The original packaging must also include all tags, information booklets, instructions, stickers, etc. For apparel, please ensure tags remain attached.

4. Secure Packing: Pack your returns firmly to prevent any damage in transit.  If we receive a damaged item, we cannot determine the cause of the damage and will not accept it as a return.5. Shipping Container: Avoid using the item's original packaging as the shipping container. Instead, place items in the original packaging inside a larger, separate shipping box. We recommend reusing the box your items were initially shipped in.6. Necessary Information: Remember to include the original invoice or other essential contact information with your return.7. Confirmation Process: Before returning items, make sure all return conditions are met. Take photos or videos and send them to our customer service team for confirmation. Once approved, ship the products promptly and provide our team with a valid tracking number. We will process the refund within three working days after receiving the item, we will not deduct any fees, full refund, The refund is expected to arrive within 1 working day after the refund is processed.

NOTE:

CUSTOMER SERVICE EMAIL: EGRBETTER@HUANGZHU.WORK

Please make sure to include a note with your order number (e.g., KE-XXXX) inside the package before sending it for delivery.

EXCEPTIONS AND EXPLANATIONS

EXCHANGES

For a quicker exchange process, we recommend returning the item you wish to exchange and then placing a separate order for the desired new item..

Shipping Fee

If you want to return or exchange an item with no quality issues, you will be responsible for paying the return shipping fee. Please note, if the purchased part does not fit due to failure in checking the Fitment information carefully, you will also bear the cost of return shipping. We do not charge for re listing fees. However, if we provide incorrect Fitment information, we will bear the cost.

Product Issues

If you receive an incorrect item or the product has quality issues, we will process exchange or return requests within 3 business days. Since it is our fault, we will bear the cost of returning the goods. However, please follow the return standards to ensure that the items are in new condition and do not affect their resale.

Out-of-Stock Items

In case the product you ordered cannot be delivered on time due to inventory shortages, we will contact you via email. You may choose to wait for the stock to arrive or request a refund.

In case your specific situation falls outside the scope of the policy mentioned above, please do not hesitate to contact us. We will make every effort to support you in resolving the issue.