2005-2020 Toyota Tacoma 2WD 4WD (6 lugs only)
NOT FIT 5-LUG MODEL
NOT RECOMMENDED FOR TRD OFF-ROAD MODELS
Lift amount does NOT equal spacer thickness owing to the suspension geometry.
About The Thickness of Front:
Lift Spacer Thickness and Lift height is not a 1:1 Ratio due to the Suspension Geometry
The actual thickness of spacer is thinner than 3'', but it can lift 3'' due to the Suspension
CONTENTS:
2x Aircraft Billet Front Strut Spacers
2x Rear lift blocks
4x U bolts
2x Differential Drop with Skid Plate Spacers
Installation Hardware with 10.9 Grade or 12.9 Grade
Installation Instructions
Benefit of Rear:
Solid aluminum rear lift blocks are light but not strong enough for offroad.
Our Internal Reinforced cross design ensure stronger support than other sellers.
The extended U bolts are made of high quality alloy steel with heat treatment to reach grade 8-150000 psi yield.
It is much stronger than OE grade 4.5. Thread Pitch of our U bolts is 9/16'', not 14X1.5 from many sellers. 20mm height nuts and 3mm thick washers to support high torsion.
Powder coated and zinc plated finished for long lasting.
NOT FIT 5-LUG MODEL
NOT RECOMMENDED FOR TRD OFF-ROAD MODELS
Lift amount does NOT equal spacer thickness owing to the suspension geometry.
About The Thickness of Front:
Lift Spacer Thickness and Lift height is not a 1:1 Ratio due to the Suspension Geometry
The actual thickness of spacer is thinner than 3'', but it can lift 3'' due to the Suspension
CONTENTS:
2x Aircraft Billet Front Strut Spacers
2x Rear lift blocks
4x U bolts
2x Differential Drop with Skid Plate Spacers
Installation Hardware with 10.9 Grade or 12.9 Grade
Installation Instructions
Benefit of Rear:
Solid aluminum rear lift blocks are light but not strong enough for offroad.
Our Internal Reinforced cross design ensure stronger support than other sellers.
The extended U bolts are made of high quality alloy steel with heat treatment to reach grade 8-150000 psi yield.
It is much stronger than OE grade 4.5. Thread Pitch of our U bolts is 9/16'', not 14X1.5 from many sellers. 20mm height nuts and 3mm thick washers to support high torsion.
Powder coated and zinc plated finished for long lasting.