Ranger Upstream or Downstream 02 O2 Oxygen Sensor for Ford Mustang Explorer

  • Sale
  • Regular price $34.30
Shipping calculated at checkout.


Please check fitment notes & description for accurate information.
1996-2000 Ford Contour 2.0L
1996-2000 Ford Contour 2.5L
1994-2007 Ford Crown Victoria 4.6L
2004 2007 2012 Ford E-150 4.6L
2004 2007 2010-2012 Ford E-150 5.4L
2004 Ford E-150 Club Wagon 4.6L
2004 Ford E-150 Club Wagon 5.4L
2007-2008 Ford E-150 Econoline 5.4L
2003 Ford E-250 4.2L
2003-2004 2007 2012 Ford E-250 4.6L
2003-2004 2007 2010-2012 Ford E-250 5.4L
1999-2002 Ford E-250 Econoline 4.2L
2000-2002 Ford E-250 Econoline 5.4L
2004-2005 Ford E-250 Super Duty 5.4L
2003-2004 Ford E-350 Club Wagon 5.4L
2003 Ford E-350 Club Wagon 6.8L
2007-2008 Ford E-350 Econoline 5.4L
2004-2012 Ford E-350 Super Duty 5.4L
2004-2012 Ford E-350 Super Duty 6.8L
2001-2002 Ford E-450 Econoline Super Duty 5.4L
2000-2002 Ford E-450 Econoline Super Duty 6.8L
2004-2012 Ford E-450 Super Duty 5.4L
2004-2008 2010-2012 Ford E-450 Super Duty 6.8L
2002 Ford E-550 Econoline Super Duty 6.8L
2003 Ford E-550 Super Duty 6.8L
2003 Ford Econoline 4.2L
2004 Ford Econoline 4.6L
1999-2006 Ford Econoline 5.4L
2010 Ford Edge 3.5L
2006-2007 Ford Escape 2.3L
2010 Ford Escape 2.5L
2007-2008 2010 Ford Escape 3.0L
2000-2003 Ford Escort 2.0L
2000-2005 Ford Excursion 5.4L
2000-2005 Ford Excursion 6.8L
1997-2004 Ford Expedition 4.6L
1997-2004 2006-2007 Ford Expedition 5.4L
2002-2003 2006 2010 Ford Explorer 4.0L
2002-2003 2006 2010 Ford Explorer 4.6L
2008-2010 Ford Explorer Sport Trac 4.6L
1998 Ford F-100 Ranger 2.5L
1998 Ford F-100 Ranger 3.0L
2003-2004 Ford F-150 4.2L
2003 Ford F-150 4.6L
1999-2003 Ford F-150 5.4L
1997-2003 Ford F-250 4.6L
1997-2001 Ford F-250 5.4L
1996 Ford F-250 7.5L
2000-2003 2007-2009 Ford F-250 Super Duty 5.4L
2011 Ford F-250 Super Duty 6.2L
2000-2004 2007-2009 Ford F-250 Super Duty 6.8L
1999-2004 2005-2009 Ford F-350 5.4L
1996 Ford F-350 7.5L
2000-2003 2007 2009 Ford F-350 Super Duty 5.4L
2011 Ford F-350 Super Duty 6.2L
2000-2003 2007 2009 Ford F-350 Super Duty 6.8L
2001-2008 Ford F-450 6.8L
1997 Ford F-450 7.5L
2000-2005 2007-2008 2011-2012 Ford F-450 Super Duty 6.8L
2000-2008 2010 Ford F53 6.8L
2000-2008 2012 Ford F-550 Super Duty 6.8L
2005-2007 Ford Five Hundred 3.0L
2010 Ford Flex 3.5L
2000-2004 Ford Focus 2.0L
2005-2007 Ford Freestyle 3.0L
2006-2007 Ford Fusion 2.3L
2007 Ford Fusion 3.0L
2005-2006 Ford GT 5.4L
1999-2004 Ford Mustang 3.8L
2004 Ford Mustang 3.9L
2005-2010 Ford Mustang 4.0L
1999-2010 Ford Mustang 4.6L
2007-2010 Ford Mustang 5.4L
2004 2007 2010 Ford Ranger 2.3L
1996 2004 Ford Ranger 3.0L
1996 2004 Ford Ranger 4.0L
1991-2007 Ford Taurus 3.0L
1999 Ford Taurus 3.4L
2010 Ford Taurus 3.5L
1992-1995 Ford Taurus 3.8L
1992-1994 Ford Tempo 2.3L
1992-1994 Ford Tempo 3.0L
2002-2005 Ford Thunderbird 3.9L

How to install the oxygen sensor?

Step 1 - Some sensors are equipped with a heat shield that must be removed before the sensor removal, this is performed by removing any mounting bolts.
Step 2 - By using a regular socket it minimizes potential damage to the sensor body and the threads, this technique helps avoid stripping the old sensor upon removal.
Step 3 - Then, locate and disconnect the wiring connector, this step should be done before removing the sensor if the wiring is still attached.
Step 4 - Its important that the wiring harness connectors are exactly the same, each sensor is unique to it's position and is located in the system by its connector configuration. (Note: some replacement sensors have a universal electrical connector that must be configured to the wiring of the old sensor.)
Step 5 - Use a small wire brush to help clean the threaded port to ensure a proper seal of the new sensor. Gently install the new oxygen sensor by hand while keeping the wiring and connector free from bends.
Step 6 - Gently tighten the sensor while keeping wiring free from damage, these sensors need to be fairly snug to avoid leakage.
Step 7 - Once the sensor is tightened, reinstall any heat shields or bracing that had to be removed.
Step 8 - After the heat shield has been reinstalled, mount the connector to it's holder and reattach the connector back onto the wiring harness. If the car has diagnostic trouble codes, they will need to be cleared.