Roll up tonneau cover front view
Roll up tonneau cover installation kit
Roll up tonneau cover included parts
EGR Performance roll up tonneau cover
Roll up tonneau cover front view
Roll up tonneau cover installation kit
Roll up tonneau cover included parts
EGR Performance roll up tonneau cover

6.5FT Roll Up Tonneau Cover for Dodge Ram 1500, 2500 & 3500 Fleetside Truck Beds (2002–2023)

$254.89
Shipping calculated at checkout.
50 in stock, ready to ship
🛒 Bulk Discount: Save 6% on 2+ Items
🎁 Special Offer: Enjoy 10% Off on 3+ Items
📞 Large Orders (10+): Contact Us for Exclusive Deals
Details
USA-stock 6.5FT roll-up tonneau cover for Dodge Ram 1500, 2500 & 3500. Fast shipping.
Protect cargo from rain, UV rays, and theft with a heavy-duty vinyl roll-up cover for Fleetside 6.4'/6.5' Dodge Ram beds. Quick USA delivery.
Brand Model Year
Dodge/Ram Ram 1500 Fleetside 6.5FT Bed 2002–2018
Ram Ram 1500 Classic Fleetside 6.4FT Bed, without Ram Box 2019–2023
Dodge/Ram Ram 2500 Fleetside 6.4FT Bed, without Ram Box 2003–2023
Dodge/Ram Ram 3500 Fleetside 6.4FT Bed, without Ram Box 2003–2023

✅ Exact Fitment Guarantee | If you are unsure about compatibility, please contact us at service@egrperformance.com with your VIN number.
Shipping Details

Ontario CA / Springdale OH / Newark NJ
Package List
  • 1x Roll-up vinyl tonneau cover with built-in horizontal crossbars
  • 1x Driver-side aluminum side rail
  • 1x Passenger-side aluminum side rail
  • 1x Set of stainless steel mounting clamps
  • 1x Adjustable tension system
  • 1x Side Velcro sealing system
  • 1x Complete hardware kit
  • 1x Installation instructions
Delivery Time

2-5 working days inland in the United States
Attention
Legal Disclaimer EGR DPF Delete Offroad Use Only

LEGAL DISCLAIMER

This product may NEVER be installed on a vehicle registered for highway or public street use. By installing this product onto your vehicle, you assume all risk and liability associated with its use. It is your responsibility to make sure your vehicle complies with all federal, state, and local emissions laws.

Federal and many state and local laws prohibit the removal, modification or rendering inoperative of any part of the design affecting emissions or safety on motor vehicles used on a public street or highway. Violation may result in a fine of up to $32,500 per vehicle (or possibly higher depending on changes in the law). All civil penalties and fines for removing your vehicle's emissions equipment are the sole responsibility of the end user.

No other applications besides off-road competition racing use are intended or implied. Depending on where you live, additional restrictions may apply. Check all applicable laws before installing or using.

Not available for sale or use in the state of California, Colorado and Arizona.

Product details

The 6.5FT Roll Up Tonneau Cover for Dodge Ram 1500, 2500, and 3500 trucks is a practical bed protection upgrade for owners who want cleaner cargo, better security, and full bed access when needed. It is designed for Fleetside 6.5FT and 6.4FT beds, including the 2019–2023 Ram 1500 Classic, while excluding Ram Box-equipped models. Whether your Ram is powered by a 5.7L HEMI, 6.7L Cummins diesel, 3.6L Pentastar, or another factory engine, this cover follows the bed rails rather than modifying the engine or emissions systems. The standout benefit is its heavy-duty 24oz marine-grade vinyl construction, which combines weather resistance with a simple roll-up design. Built-in horizontal crossbars support the cover when closed, while aircraft-grade aluminum rails and stainless steel clamps provide a secure mounting foundation. The side Velcro seals, tailgate latch system, and adjustable tension help keep the cover tight and wrinkle-free. Continue reading for complete fitment details, installation steps, maintenance tips, and frequently asked questions.

Product Overview

  • The 6.5FT Roll Up Tonneau Cover is a soft, roll-style truck bed cover built for Dodge Ram Fleetside beds.
  • It protects tools, equipment, luggage, and cargo from rain, sun exposure, dust, and unwanted access.
  • The cover rolls forward with the built-in crossbars, allowing nearly full use of the truck bed when hauling larger items.
  • Side Velcro strips seal the cover edges, while a tailgate latch system helps secure the bed.
  • It is designed for simple, no-drill mounting using the included aluminum rails, stainless steel clamps, and installation hardware.

Ideal For

  • Towing and Hauling: Helps protect cargo from wind and weather while towing, and rolls open when you need full bed space for tall loads.
  • Daily Driving: Reduces exposure to rain, dust, and UV damage while improving the finished look of your Ram pickup.
  • Off-Road Use: Helps keep loose dirt, mud, and trail debris out of the bed, though the cover should be secured properly before rough terrain.
  • Commercial Vehicles: Provides a clean, covered storage area for tools, work gear, parts, and delivery equipment.
  • Engine Performance Upgrades: Complements suspension, lighting, bed storage, and appearance upgrades without changing engine calibrations or emissions components.
  • Long-Term Vehicle Ownership: Helps protect the bed and cargo from weather-related wear, spills, and sun exposure over time.

Core Advantages

  • Weather-Resistant Cover: Heavy-duty 24oz marine-grade dual-coated vinyl + helps block rain, dust, UV rays, and road debris.
  • Supportive Crossbar Design: Built-in horizontal crossbars + support the cover when closed and roll up with the tarp for full bed access.
  • Secure Side and Tailgate Sealing: Velcro side strips and latch lock system + help keep the cover closed, tight, and protected from unwanted access.
  • Adjustable Tension System: Tension adjusters at the side rail ends + help maintain a smooth, wrinkle-free fit in changing weather.
  • Improved Aerodynamic Efficiency: A covered bed may reduce air turbulence + some drivers notice improved MPG, but results vary by load, driving style, and vehicle condition.
  • No Engine Calibration Required: No tuner or ECU reset is needed + the cover does not alter engine output, fuel systems, or emissions equipment.
  • Direct Bolt-On Installation: Aluminum rails and stainless steel clamps mount to the bed + no factory drilling is required for most installations.
  • All-In-One Kit: The cover, rails, clamps, tension components, and mounting hardware are included + most owners can install the cover without buying extra major parts.

Technical Specifications

  • Product Type: Soft roll-up tonneau cover
  • Material: 24oz dual-coated, heavy-duty marine-grade vinyl
  • Support Structure: Built-in horizontal crossbars
  • Side Rails: Aircraft-grade aluminum
  • Clamps: Stainless steel
  • Sealing: Side Velcro strips
  • Security: Tailgate latch lock system
  • Tension Control: Adjustable tension system at the side rail ends
  • Finish: Black vinyl with matte black aluminum rails
  • Bed Length Compatibility: Fleetside 6.5FT / 6.4FT bed
  • Ram Box Compatibility: Not compatible with Ram Box beds
  • Drilling Required: No drilling required for standard installation
  • Weight: Approximately 25–30 lb shipping weight; final packaged weight may vary
  • Dimensions: Sized to fit 6.5FT/6.4FT Fleetside Ram pickup beds; packaged dimensions vary by shipment
  • Warranty: 1 Year Limited Warranty against manufacturing defects

Why Choose EGR Performance

  • Premium Quality Materials: Durable marine-grade vinyl, aluminum rails, and stainless steel clamps are selected for regular truck use.
  • Precision Engineering: Each cover is designed to follow the bed contours and mounting points of compatible Dodge Ram models.
  • Rigorous Testing: Products are evaluated for fit, material durability, weather sealing, hardware retention, and real-world usability.
  • Dedicated Customer Support: Email us at service@egrperformance.com for fitment or installation assistance.
  • Fast Shipping from USA Warehouse: Orders ship from United States inventory for quicker domestic delivery.
  • 1 Year Limited Warranty: Coverage is provided against qualifying manufacturing defects for one year.

Troubleshooting and Problem Solving

Common Issues After Installation

  • Cover appears loose or sagging
  • Vinyl wrinkles after temperature changes
  • Water enters along the bed edges
  • Side Velcro does not seal fully
  • Clamps shift or feel loose
  • Cover does not align evenly with the tailgate
  • Bedliner prevents clamp installation
  • Cover is difficult to roll or unroll

Cover-Specific Solutions

  • Loose or sagging cover: Adjust the tension controls at the end of the side rails until the vinyl is evenly tensioned.
  • Wrinkled vinyl: Allow the material to warm in sunlight, reposition the cover, and adjust the tension system gradually.
  • Water at the edges: Confirm the side Velcro is fully engaged, the rails are level, and the tailgate area is properly aligned.
  • Clamps shifting: Loosen, reposition, and retighten the clamps evenly; never drive with loose mounting hardware.
  • Bedliner interference: For over-the-bedrail liners, cut only the small openings required for clamp contact.
  • Poor tailgate alignment: Reposition both side rails equally and confirm the cover is square to the bed.

Check Engine Light and Error Codes

This roll-up tonneau cover does not connect to the engine, ECU, sensors, fuel system, or emissions system. Therefore, it should not cause a check engine light or diagnostic trouble codes. If a check engine light appears after installation, it is likely unrelated and should be diagnosed using the vehicle’s stored trouble codes.

How to Reset Check Engine Light After Installation

  1. Confirm the tonneau cover installation did not disturb any electrical connectors, sensors, or wiring near the bed.
  2. Use an OBD-II scanner to read and record any stored codes.
  3. Repair the condition causing the code according to the vehicle service information.
  4. Clear the code with the OBD-II scanner or have a qualified shop perform the reset.
  5. Drive the vehicle normally and verify that the code does not return.

What to Do If Your Vehicle Loses Power After Installation

  • Check that no tools, hardware, or loose cargo are interfering with pedals, wiring, or bed-mounted equipment.
  • Inspect nearby electrical connectors in case a plug was accidentally disturbed during installation.
  • Read diagnostic trouble codes with an OBD-II scanner.
  • Verify that the issue is not related to fuel, battery, throttle, or engine sensor conditions.
  • Contact a qualified mechanic if the power loss continues; the tonneau cover itself does not control engine power.

Vehicle Fitment

This 6.5FT roll-up tonneau cover fits the following Dodge Ram and Ram pickup applications with Fleetside beds:

  • 2002–2018 Dodge Ram 1500 with a Fleetside 6.5FT bed
  • 2019–2023 Ram 1500 Classic with a Fleetside 6.4FT bed and without Ram Box
  • 2003–2023 Dodge Ram 2500 with a Fleetside 6.4FT bed and without Ram Box
  • 2003–2023 Dodge Ram 3500 with a Fleetside 6.4FT bed and without Ram Box

Cab size does not affect fitment as long as the model and bed length are correct. The cover is compatible with all applicable factory engine options, including gasoline and diesel models, because fitment is based on the bed rather than the engine.Exceptions and special conditions:

  • Not compatible with Ram Box beds.
  • Not designed for the non-Classic 2019–2023 Ram 1500 new-body-style 6.4FT bed unless the specific application is confirmed separately.
  • Not designed for Stepside, Dually-specific bed configurations, or modified bed widths outside the listed Fleetside fitment.
  • Over-the-bedrail bedliners may require small holes for clamp installation.
  • Under-the-bedrail bedliners generally require no modification.
  • Custom bed modifications, damaged bed rails, or aftermarket accessories may affect fitment.

For 100% fitment confirmation, please send your VIN number to service@egrperformance.com.

Long-Term Maintenance Tips

  • Regular Inspection: Every 5,000 miles or once each season, inspect the vinyl, crossbars, Velcro, clamps, side rails, and tailgate alignment.
  • Routine Cleaning: Wash the vinyl with mild soap and water; avoid harsh solvents, abrasive brushes, or petroleum-based cleaners.
  • Tension Adjustment: Check and adjust tension after extreme temperature changes or if the cover becomes loose, wrinkled, or noisy.
  • Velcro Care: Remove dirt or debris from the Velcro strips so the side seals can close completely.
  • Hardware Check: Every 10,000 miles or after heavy off-road use, confirm that clamps and mounting bolts remain tight.
  • Wear Parts Replacement: Replace damaged Velcro, clamps, or hardware promptly instead of operating the cover with insecure mounting.
  • Storage Tips: When the cover is rolled open, secure it evenly and avoid folding sharp objects against the vinyl.
  • Weather Protection: Allow the cover to dry before leaving it rolled for long periods to reduce moisture buildup.
  • Warranty Reminder: Following these maintenance guidelines will keep your 1 Year Limited Warranty valid.
  1. Dispatch Time: Orders will be shipped within 24 hours after successful payment.
  2. Delivery Time: 2-5 business days after dispatch (delivery speed depends on proximity to warehouse location).
  3. Return Window:7 days for unsatisfactory items45 days for quality-related issues
  4. Refund Processing: Refunds will be processed back to your original payment method within 2-4 business days after receiving the automated refund confirmation email (subject to bank verification).

What is a roll-up tonneau cover?

A roll-up tonneau cover is a soft or hard bed cover that protects cargo and can be rolled toward the cab for full bed access. This model uses heavy-duty vinyl with built-in horizontal crossbars.

How does a roll-up tonneau cover work?

The cover mounts to side rails on the truck bed and seals along the sides with Velcro. To access the full bed, simply release the tailgate end and roll the cover toward the cab.

What are the benefits of a roll-up tonneau cover?

It helps protect cargo from weather, UV damage, dust, and unwanted access while improving the truck’s appearance. It also allows quick access to the bed without removing a heavy one-piece cover.

Will a roll-up tonneau cover void my warranty?

A properly installed tonneau cover should not void a vehicle’s warranty simply because it is an accessory. Damage caused by incorrect installation, modification, or incompatible bedliners may not be covered.

Is a roll-up tonneau cover legal in my state?

Soft roll-up tonneau covers are generally legal throughout the United States because they do not alter emissions or engine systems. Ensure the cover does not obstruct lights, license plates, or safe driving visibility.

Do I need a tuner for a roll-up tonneau cover?

No. A tonneau cover does not change engine tuning, fuel delivery, exhaust flow, or emissions controls, so no tuner is required.

How much horsepower does a roll-up tonneau cover add?

This cover does not add horsepower. It is designed for cargo protection, security, weather resistance, and improved bed aerodynamics rather than engine performance.

How much MPG gain can I expect from a roll-up tonneau cover?

Some drivers experience a small MPG improvement because a covered bed may reduce aerodynamic drag. Gains are not guaranteed and vary with speed, load, tire setup, driving conditions, and vehicle condition.

How long does it take to install a roll-up tonneau cover?

Most installations take approximately 30–60 minutes. Additional time may be needed if an over-the-bedrail bedliner requires cutting for clamp access.

Can I install a roll-up tonneau cover myself?

Yes. The cover is designed for no-drill installation using the included rails, clamps, and hardware. Two people can make positioning easier, especially when aligning the rails.

How often should I maintain my roll-up tonneau cover?

Inspect the cover, clamps, Velcro, and tension every 5,000 miles or seasonally. Clean the vinyl regularly and retighten hardware if it becomes loose.

Will this tonneau cover fit my 2019 Ram 1500?

It fits the 2019–2023 Ram 1500 Classic with a Fleetside 6.4FT bed and no Ram Box. It does not fit Ram Box models, and the new-body-style non-Classic application should be verified separately.

Will this tonneau cover fit a Ram 2500 or 3500 with Ram Box?

No. This cover is not compatible with Ram Box-equipped beds. The side storage boxes change the bed rail configuration and prevent proper fitment.

What is the warranty on this tonneau cover?

The cover includes a 1 Year Limited Warranty against manufacturing defects. Damage from misuse, accidents, improper installation, or lack of maintenance is not covered.

Do you offer technical support?

Yes. For fitment, installation, or product questions, email service@egrperformance.com. VIN information is recommended when confirming compatibility.

How long does shipping take?

Orders ship from a USA warehouse, and domestic delivery is usually faster than international shipping. Actual transit time depends on your location and the selected shipping service.

Can I return this tonneau cover if it does not fit?

Please confirm fitment before ordering and contact us with your VIN if you are unsure. If the product arrives damaged or does not match the confirmed application, contact customer service for return assistance.



Installation Difficulty Level

Easy

Estimated Installation Time

30–60 minutes

Required Tools

  • Socket set
  • Measuring tape
  • Screwdrivers
  • Pliers
  • Utility knife or scissors, only if cutting over-the-bedrail bedliner is required
  • Torque wrench, optional

Step-by-Step Installation Overview

  1. Confirm the truck bed length, model, and body style before installation; verify that the bed is not Ram Box-equipped.
  2. Place the driver and passenger side rails along the upper bed edges and confirm alignment with the tailgate and bulkhead.
  3. Secure the rails using the stainless steel clamps and included hardware, tightening evenly on both sides.
  4. Position the rolled cover at the bulkhead, unroll it toward the tailgate, and engage the side Velcro seals.
  5. Adjust the rail-end tension system until the vinyl is smooth and wrinkle-free, then close and latch the tailgate to check fitment.

Important Note: Standard installation is no-drill. Vehicles with an over-the-bedrail bedliner may require small holes to be cut in the liner so the clamps can be secured properly. Under-the-bedrail bedliners generally work without modification. If you need technical support, please contact service@egrperformance.com.