EGR Delete Exhaust Intake Block Off Plate Kit For Toyota 20R 22RE
Was a little worried at first about this being spam and the product not being true. Product was real and received quickly. The install was smooth with a you tube video by Dark Iron Diesel. Highly recommend watching fully first and then keeping it up and returning to it to it through out the install. I ended up doing a monster ram install by Banks a week later and wish I installed this at the same time. Live and learn. Good luck with your build. Jay
Julian I got a 5.7 Liter hemi 2018 dodge charger pursuit. I Put it in runs good put it in no problem the bolt was a little long but I just cut it down.
Nice color came just like the picture
Great buy
Catch can was very good quality and came fast. Still waiting on another item i ordered earlier. they told me to just be patient.
EGR Delete Plates and Plugs for 2010-Present Cummins ISX 15 CM2250 CM2350 Plug Kit Stage 2
Exhaust Header Manifold & Simulator Eliminator/Block Off Plate EGR valve delete Kit For 1987-1995 5.8L Ford F150 Bronco V8
Worked great
Only reason I didn’t give a 5 star is because the bolts provided are the wrong thread. Plate looks nice and does its job.
EGR Simulator Eliminator / Block off Plate For Ford Mustang 2.8L 5.0L Bronco 4.9L
Have not installed yet but was fast shipping and part looks to be a quality piece. Thank you!!
I received the kit and all associated parts. The only issue is the aluminum filter head. The threads inside the filter head, where the shut off valves (SOV) screw into were not in good shape. The threads were not very deep and looks like only one pass was done to cut the threads. The deeper into the head the less thread. I could only screw the shut off valves 2 turns. I had the clean out the threads with a wire brush. I was afraid to put too much pressure on the SOV and the filter head, to not strip the threads. I eventually did use a crescent wrench to tighten the SOV to the filter head and so far so good. The supplied Teflon seal tape we as so thin you could almost see thru it. I used my own which was thicker and worked fine.
One other thing was the nipple that is used to attach the filter to the head. It was loose and had the be screwed in and tightened. There was Teflon tape on it as it came installed but really no way to lock the threads. Everything else was fine.
It works as advertised
GM AFM DFM Disabler 2005-2020 | Full V8 Power | No Lifter Failure
Great product. Works as sold. I even think my has mileage has ticket upward.
Customer service is something else altogether. I waited over 2 weeks for an item that was supposed to do with 2 days. When I asked for an update, I was simply told to "be patient".
Uncertainty, because @ 95,000miles I don't know if it's too late and have I really saved my lifters from failure ? One thing is for sure, using the disabler is costing me atleast 3 mpg.
The up pipe had to be forced and bolted into position because the lower end’s bend wasn’t long enough and left the up pipe’s flexible section pushed into the block. Not ideal and hopefully it wasn’t damaged where it contacted the block.
Fit good, hose threads a little rough needed brushing, one O ring was the wrong size.
They were a time to figure out and did not have one for the big plug in the rear by the spring.
These risors are good quailty, and easy install. I bought them so i could see better in front of me better, I can see 4.5 feet farther in front of me now.
I've installed several of these 4" cat deletes, and I had no problems with the installation. It made the installation very easy. Thank you for the great product.
Working good, might be a little early to tell but I've seen no negative effects on gas mileage. It would have been been nice if there had been any instructions at all. I had to look online to see how to hook it up
Working well so far, has reduced the amount of oil my suburban is burning! Only complaint is the bright blue light when driving at night. I covered it with electrical tape.
