Door Window Seal Belt Weatherstrip Kit for Ford F150 F250 F350 Bronco (1987-1997)

x-tinymce/html

Product Overview

• Product type:Front door window belt weatherstrip kit.
• Function:Helps reduce water, dust, and glass rattle at the beltline.
• Construction:Rubber with built in metal interlayer.
• Fitment:Direct replacement, vehicle specific, not universal.
• Placement:Front left and front right door window belt positions.

Ideal For

• Cracked belt molding:Solve aged or split front door window seals.
• Water intrusion:Solve worn beltline sealing at the door glass.
• Dust entry:Solve poor sealing around the front side window opening.
• Window rattle:Solve loose sweep contact against the door glass.
• Restoration work:Solve missing front inner and outer window trim.

Technical Specifications

• Brand:EGR Performance.
• Product name:Door window seal belt weatherstrip kit.
• Quantity:4 pieces.
• Material:Rubber with built in metal interlayer.
• Color:Black.
• Placement on vehicle:Front, left, right.
• Fitment type:Direct replacement.
• Attachment type:Clip On.
• Universal fitment:No.
• Performance part:No.
• Factory reference:replacement for E7TZ1521452A.
• Factory reference:replacement for E7TZ1521453A.
• Factory reference:replacement for F2TZ1521456A.
• Factory reference:replacement for F2TZ1521457A.
• Additional reference:replacement for FO1390147 and FO1391147.
• Warranty:1 Year Limited Warranty against manufacturing defects.

Why Choose EGR Performance

• Fitment Support:Solve compatibility concern by VIN email check.
• Reference Clarity:Solve part number matching before installation.
• Warranty Coverage:Solve defect risk with 1 year limited warranty.
• Vehicle Specific Listing:Solve universal part mismatch concerns.
• US Buyer Support:Solve post purchase questions by service email.

Installation Information

Installation Difficulty Level

Easy

Estimated Installation Time

1 to 2 hours

Required Tools

• Trim removal tool.
• Phillips screwdriver.
• Flat blade screwdriver.
• Needle nose pliers.
• Clean towel.

Step-by-Step Installation Overview

• Lower the front door glass to access the belt molding.
• Remove old inner and outer window belt trim carefully.
• Clean the door beltline mounting area.
• Align each new belt molding to the correct side.
• Clip the new molding into place and test window travel.

No printed instructions included. Professional installation is highly recommended. For technical support, contact service@egrperformance.com.

Troubleshooting and Problem Solving

Common Issues After Installation

• Window binds:Belt molding is not fully seated on the door edge.
• Water leak remains:Door glass or other door seal may also be worn.
• Rattle noise:Clip on molding may be misaligned or loose.
• Uneven gap:Left and right pieces may be installed on wrong sides.

Error Code Solutions

• No DTC Code:This door weatherstrip kit has no electronic circuit.
• No DTC Code:Check engine light is not related to belt molding service.

How to Reset Check Engine Light After Installation

• No reset is required for this non electronic part.
• If a light is on, scan the vehicle with an OBD2 tool.
• Repair the unrelated engine or emissions fault first.
• Clear codes only after the related repair is complete.

What to Do If Your Vehicle Loses Power After Installation

• This product does not connect to engine or drivetrain systems.
• Inspect unrelated engine, fuel, ignition, or transmission faults.
• Use an OBD2 scanner to identify active diagnostic trouble codes.
• Contact a qualified technician if drivability symptoms continue.

Core Advantages

• 4 Piece Coverage:Covers 2 front doors with inner and outer belt moldings.
• Direct Replacement:Uses vehicle specific fitment with 0 universal setup.
• Clip On Mounting:Uses 1 listed attachment type for installation.
• Front Pair Service:Covers left and right front window belt positions.
• Reference Match:Supports 4 listed factory reference part numbers.

Complete Package Contents

• 4 pieces:Inner and outer front door window trim molding set.
• Positions included:Front left and front right beltline areas.
• Instructions:No printed installation manual included.

Long-Term Maintenance Tips

• Seal Check:Inspect every 6 months for cracks and hardening.
• Glass Travel:Test monthly to prevent binding at the beltline.
• Cleaning:Wipe every 3 months to remove dirt from the sweep edge.
• Clip Check:Inspect every 6 months to prevent loose molding noise.
• Water Test:Check after heavy rain to catch door seal issues early.