Valve Cover Set for 3.5L V6 Turbocharged Ford Lincoln (2013-2022)

x-tinymce/html

Product Overview

• Valve cover setfor 3.5L V6 Turbocharged engines.
• Seals the cylinder head area against oil, gas, and lubricant seepage.
• Helps reduce oil leakage and dust ingress around valve cover areas.
• Uses aluminum material with black matte finish.
• Direct replacement design with no modifications required.

Ideal For

• [Oil Leak Repair]: Solve oil seepage from worn valve cover sealing areas.
• [Rough Idle Concern]: Solve air pressure leakage from poor engine sealing.
• [Dust Ingress Issue]: Solve contamination entering through failed cover sealing.
• [Crankcase Smoke Check]: Solve smoke seen at vent hole or oil fill area.
• [Power Loss Diagnosis]: Solve weak acceleration linked to engine sealing loss.

Technical Specifications

• Product Type:Valve Cover Set
• Material:Aluminum
• Color:Black
• Finish:Matte
• Condition:100% Brand New
• Engine Fitment:3.5L V6 Turbocharged
• Items Included:Gasket
• Package Quantity:2 valve covers
• Manufacturer Part Number:004-356+004-357ALU
• OEM Reference:replacement for BL3Z-6582-H, DL3Z-6582-C
• Interchange Reference:replacement for BL3Z6582H, DL3Z6582C
• Warranty:1 Year Limited Warranty against manufacturing defects

Why Choose EGR Performance

• [Fitment Support]: Solve compatibility uncertainty with VIN review by email.
• [Warranty Support]: Solve defect concern with 1 Year Limited Warranty.
• [Complete Kit]: Solve missing parts concern with 2 covers, gaskets, and bolts.
• [US Support]: Solve pre-purchase questions at service@egrperformance.com.

Installation Information

Installation Difficulty Level

Moderate

Estimated Installation Time

2-4 hours

Required Tools

• Socket set
• Ratchet
• Torque wrench
• Trim removal tool
• Gasket scraper
• Clean shop towels

Step-by-Step Installation Overview

• Disconnect the battery before engine service.
• Remove obstructing covers, hoses, and ignition components.
• Remove the old valve covers and sealing material.
• Install new gaskets, covers, and bolts evenly.
• Reconnect removed parts and inspect for leaks.

No printed instructions included. Professional installation is highly recommended. For technical support, contact service@egrperformance.com.

Troubleshooting and Problem Solving

Common Issues After Installation

• [Oil Leak]: Gasket not seated evenly or bolts not tightened evenly.
• [Rough Idle]: Hose, connector, or sealing point not fully reconnected.
• [Burning Oil Smell]: Residual oil remains on hot engine surfaces.
• [Whirring Noise]: Loose component near removed engine covers.

Error Code Solutions

• [No specific DTC provided]: Recheck gasket seating, hoses, and connectors.
• [Check Engine Light]: Inspect all removed electrical connectors.
• [Misfire Symptom]: Verify ignition components were reinstalled correctly.

How to Reset Check Engine Light After Installation

• Confirm all connectors and hoses are installed.
• Clear codes with an OBD2 scan tool.
• Start the engine and idle until stable.
• Recheck for leaks and stored codes.

What to Do If Your Vehicle Loses Power After Installation

• Inspect vacuum hose routing and crankcase ventilation connections.
• Check ignition coil and wiring connector seating.
• Inspect for oil leakage around both valve covers.
• Stop driving if oil loss or smoke is present.

Core Advantages

• [2-Piece Coverage]: Includes left and right valve covers for both sides.
• [Aluminum Construction]: Replaces plastic cover locations with aluminum material.
• [Included Seals]: Includes gasket set for the valve cover installation.
• [Included Hardware]: Includes bolts listed in the package contents.
• [0 Modification Fit]: Direct replacement design with no modifications required.

Complete Package Contents

• 1left side aluminum valve cover
• 1right side aluminum valve cover
• 1gasket set
• 1bolt set

Long-Term Maintenance Tips

• [Oil Leak Check]: Inspect every oil change and clean seepage early.
• [Bolt Area Check]: Inspect after installation and prevent uneven sealing.
• [Gasket Edge Check]: Inspect every 6 months and watch for oil residue.
• [Crankcase Vent Check]: Inspect every 6 months and prevent pressure buildup.
• [Engine Bay Cleaning]: Clean spilled oil after repair and reduce smoke odor.