2 Inch Front 2 Inch Rear Leveling Lift Kit for Ford F150 (2021-2024)

$120.61
Shipping calculated at checkout.
30 in stock, ready to ship
🛒 Bulk Discount: Save 6% on 2+ Items
🎁 Special Offer: Enjoy 10% Off on 3+ Items
📞 Large Orders (10+): Contact Us for Exclusive Deals
Details

Intro Section

  • 2 inch front and rear leveling lift kit addresses stock ride height needs.
  • Fits for Ford F 150 2021 to 2024 in 2WD and 4WD layouts.
  • Provides 2 inch front lift and 2 inch rear lift using included hardware.
  • Review fitment notes, installation details, and kit contents before ordering.
Brand Model Year
Ford F 150 2WD and 4WD 2021 to 2024

✅ Exact Fitment Guarantee | If you are unsure about compatibility, contact us at service@egrperformance.com with your VIN.

Shipping Details

Ontario CA / Springdale OH / Newark NJ

Package List

Complete Package Contents

  • 2front strut spacers.
  • 2rear lift blocks.
  • 4semi round U bolts.
  • Mounting hardwareincluded.
Delivery Time

2-5 working days inland in the United States

Attention

Product details

x-tinymce/html

Product Overview

  • Product Type:Front and rear suspension leveling lift kit.
  • Fitment:For Ford F 150 2021 to 2024 2WD and 4WD.
  • Lift Height:2 inch front and 2 inch rear.
  • Design Note:Lift height does not equal spacer thickness.
  • Important:This kit does not guarantee a perfectly level truck.

Ideal For

  • Ride Height Change:Solve low factory stance concerns.
  • Front and Rear Lift:Solve uneven suspension height needs.
  • Hardware Replacement:Solve missing lift kit mounting hardware.
  • 2WD or 4WD Build:Solve fitment needs for listed Ford F 150 trucks.

Technical Specifications

  • Part Type:Suspension lift kit.
  • Vehicle Position:Left, right, front, and rear.
  • Drive Type:2WD and 4WD.
  • Lift Height:2 inch front and 2 inch rear.
  • Front Spacer Thickness:1.34 inch 34 mm.
  • Rear Block Thickness:2 inch 51 mm.
  • Rear Block Size:5.12 inch long by 2.48 inch wide.
  • U Bolt Size:9/16 inch 18 thread semi round.
  • U Bolt Length:12.8 inch.
  • U Bolt Width:3.15 inch.
  • Front Material:Billet aluminum.
  • Rear Material:Carbon steel.
  • Surface Finish:Corrosion and oxidation resistant.
  • Color:Black.
  • Adjustable:No.

Why Choose EGR Performance

  • Fitment Support:Solve VIN compatibility concerns by email.
  • Warranty Coverage:Solve defect concerns with1 Year Limited Warranty against manufacturing defects.
  • Clear Specs:Solve wrong part concerns with measured lift data.
  • Truck Focus:Solve Ford F 150 suspension kit selection questions.

Installation Information

Installation Difficulty Level

Moderate

Estimated Installation Time

2 to 4 hours

Required Tools

  • Floor jack and jack stands.
  • Socket set and wrench set.
  • Torque wrench.
  • Spring safe work area.
  • Wheel chocks.

Step-by-Step Installation Overview

  • Park on level ground and secure the vehicle.
  • Remove factory strut assemblies as needed.
  • Install front spacers on the original strut mount.
  • Install rear blocks between axle and leaf pack.
  • Recheck hardware torque and complete alignment.

No printed instructions included. Professional installation is highly recommended. For technical support, contact service@egrperformance.com.

Troubleshooting and Problem Solving

Common Issues After Installation

  • Truck Not Fully Level:Factory front and rear height difference varies.
  • Spacer Looks Under 2 Inch:Lift height and spacer thickness are not 1 to 1.
  • Rear Height Difference:4WD factory block replacement changes net rear lift.
  • Steering Pull:Alignment required after suspension disassembly.
  • UCA Contact Risk:FX4 based models are not recommended.

Error Code Solutions

  • No Product Specific DTC:This suspension kit has no electronic sensor.
  • ABS Light:Check wheel speed sensor wiring after suspension work.
  • Stability Light:Complete alignment and inspect steering angle status.
  • Check Engine Light:Scan the vehicle before clearing any code.

How to Reset Check Engine Light After Installation

  • Confirm no engine parts were disconnected.
  • Scan the vehicle with an OBD2 tool.
  • Repair the detected fault before clearing codes.
  • Clear codes only after the repair is complete.

What to Do If Your Vehicle Loses Power After Installation

  • Stop driving and scan for stored DTCs.
  • Inspect any disconnected wiring near the work area.
  • Verify wheels, brakes, and suspension are not binding.
  • Contact a professional technician before further driving.

Core Advantages

  • Matched Lift Height:Front and rear kit gives2 inchlift at both ends.
  • Complete Hardware:Includes8 total main componentsfor installation.
  • Front Spacer Design:Uses1.34 inch 34 mmspacer thickness.
  • Rear Block Design:Uses2 inch 51 mmrear block thickness.
  • Non Adjustable Layout:Fixed lift height reduces adjustment steps.

Complete Package Contents

  • 2front strut spacers.
  • 2rear lift blocks.
  • 4semi round U bolts.
  • Mounting hardwareincluded.

Long-Term Maintenance Tips

  • Hardware Torque:Inspect after 50 miles to prevent loosening.
  • Wheel Alignment:Check after installation to prevent tire wear.
  • U Bolts:Inspect every oil change to prevent clamp movement.
  • Strut Mounts:Inspect every 6 months to prevent noise.
  • Rear Blocks:Inspect every 6 months to prevent axle shift.

x-tinymce/html

Vehicle Fitment

  • Fits forFord F 1502021 to 2024.
  • Fits for2WDmodels.
  • Fits for4WDmodels.
  • Not recommended forFX4 based models.
  • Will not fit forFord Raptor.
  • Will not fit for2004 Heritagemodels.
  • For VIN confirmation, email service@egrperformance.com before ordering.
  1. Dispatch Time: Orders will be shipped within 24 hours after successful payment.
  2. Delivery Time: 2-5 business days after dispatch (delivery speed depends on proximity to warehouse location).
  3. Return Window:7 days for unsatisfactory items45 days for quality-related issues
  4. Refund Processing: Refunds will be processed back to your original payment method within 2-4 business days after receiving the automated refund confirmation email (subject to bank verification).

x-tinymce/html

Will this kit fit my 2021 to 2024 Ford F 150?

Yes, it fits for Ford F 150 2021 to 2024 in 2WD and 4WD layouts.

Does this kit fit Ford Raptor?

No, this kit will not fit for Ford Raptor models.

Is this kit recommended for FX4 based models?

No, FX4 based models are not recommended due to possible UCA contact.

Does the kit fit 2WD and 4WD trucks?

Yes, the listed fitment includes both 2WD and 4WD Ford F 150 models.

How much lift does this kit provide?

The kit provides 2 inch front lift and 2 inch rear lift.

Why is the front spacer not 2 inches thick?

Suspension geometry means spacer thickness and lift height are not 1 to 1.

What is the front spacer thickness?

The front spacer thickness is 1.34 inch, equal to 34 mm.

What is the rear block thickness?

The rear block thickness is 2 inch, equal to 51 mm.

Will this kit make my truck perfectly level?

Not always. Final stance depends on the truck's front and rear height difference.

What comes in the package?

The package includes 2 front strut spacers, 2 rear blocks, and 4 U bolts.

Is an alignment required after installation?

A wheel alignment is recommended after any suspension components are altered.

Are printed instructions included?

No printed instructions are included. Professional installation is highly recommended.

What tools are needed for installation?

Common tools include a jack, jack stands, sockets, wrenches, and torque wrench.

What happens on 4WD models with factory rear blocks?

The factory block is replaced by this lift block, changing the net rear lift.

What warranty is included?

EGR Performance includes a 1 Year Limited Warranty against manufacturing defects.