EGR Delete 4" Down Pipe for 6.7L Powerstroke Ford F250 F350 2011-2016

$415.98
Shipping calculated at checkout.
Type: 4" Down Pipe & EGR Delete 2011-2016
100 in stock, ready to ship
🛒 Bulk Discount: Save 6% on 2+ Items
🎁 Special Offer: Enjoy 10% Off on 3+ Items
📞 Large Orders (10+): Contact Us for Exclusive Deals
Details

Upgrade your Ford 6.7L Powerstroke. Our EGR Delete Kit + 4" aluminized steel down pipe bundle reduces exhaust restriction. USA stock, fast shipping from our CA warehouse. This off-road diesel performance bundle fits 2011-2016 Ford F250 F350 F450 F550 6.7L Powerstroke. Remove restrictive factory EGR hardware, lower EGT and unlock extra power.

Brand Model Year Engine Model
Ford F-250 Super Duty 2011-2016 6.7L Powerstroke V8 Diesel
Ford F-350 Super Duty 2011-2016 6.7L Powerstroke V8 Diesel
Ford F-450 Super Duty 2011-2016 6.7L Powerstroke V8 Diesel
Ford F-550 Super Duty 2011-2016 6.7L Powerstroke V8 Diesel

✅ Exact Fitment Guarantee. If unsure about compatibility, contact us at service@egrperformance.com with your VIN number.

Product Overview

This bundle combines EGR Delete Kit and 4" aluminized steel turbo down pipe for off-road modification on 2011–2016 Ford 6.7L Powerstroke. It removes failure-prone stock EGR valve and cooler to stop hot soot recirculating into intake manifold. The 4" down pipe replaces factory turbo exhaust section, improving exhaust flow and lowering backpressure under heavy load. It reduces intake carbon buildup, cuts EGT and boosts turbo response for towing & off-road use. An off-road tuner is required to clear emission fault codes after installation.

Ideal For

Towing & hauling, work truck daily driving, off-road racing, commercial fleet vehicles, diesel performance builds, owners wanting to prevent costly EGR failures.

Core Advantages

Extra horsepower & low-end torque; 3-5% better fuel economy; up to 20°C lower exhaust gas temperature; less carbon buildup to extend engine service life. Direct bolt-on install, no cutting/welding. All-in-one package saves separate shipping cost.

Technical Specifications Material: Aluminized steel down pipe; 6061-T6 billet aluminum block plates +304L stainless steel fittings. Finish: Aluminized anti-corrosion coating; raw machined aluminum. Weight: 27 lbs. Down pipe: 4" inlet, 37" length. Warranty: 1 Year Limited Warranty for manufacturing defects.

Why Choose EGR Performance

Premium heat & rust-resistant materials, CAD precision design, mandrel bent tubing. All parts pass pressure and salt spray testing. Fast CA warehouse shipping, dedicated support, 1-year warranty.

 
Shipping Details

Ontario CA / Springdale OH / Newark NJ / Houston TX
*Based on your shipping address, we'll pick the closest warehouse to ship from. Since some product isn't stored in the same warehouse, you might get several packages.
Package List
Delivery Time

2-5 working days inland in the United States
Attention
Legal Disclaimer EGR DPF Delete Offroad Use Only

LEGAL DISCLAIMER

This product may NEVER be installed on a vehicle registered for highway or public street use. By installing this product onto your vehicle, you assume all risk and liability associated with its use. It is your responsibility to make sure your vehicle complies with all federal, state, and local emissions laws.

Federal and many state and local laws prohibit the removal, modification or rendering inoperative of any part of the design affecting emissions or safety on motor vehicles used on a public street or highway. Violation may result in a fine of up to $32,500 per vehicle (or possibly higher depending on changes in the law). All civil penalties and fines for removing your vehicle's emissions equipment are the sole responsibility of the end user.

No other applications besides off-road competition racing use are intended or implied. Depending on where you live, additional restrictions may apply. Check all applicable laws before installing or using.

Not available for sale or use in the state of California, Colorado and Arizona.
Type

Product details

Core Advantages

  • Increased Horsepower and Torque: Reduces exhaust restriction, unlocking extra low-end torque and horsepower for towing and heavy hauling.
  • Improved Fuel Efficiency: Free-flow exhaust optimizes combustion, delivering 3-5% better fuel economy under steady cruising and towing conditions.
  • Reduced Engine Temperature: Delivers up to 20°C lower exhaust gas temperature, a critical benefit for long heavy trailer pulls.
  • Extended Engine Life: Stops carbon soot buildup in intake, EGR cooler and turbo components, reducing long-term engine wear.
  • Direct Bolt-On Installation: Precision cut parts match factory mounting points; no cutting or welding required for direct fit installation.
  • All-In-One Kit: Bundle ships with both EGR delete hardware and 4" aluminized steel down pipe in one order, saving separate shipping cost.

Technical Specifications

  • Material: Aluminized steel for down pipe; 6061-T6 billet aluminum block-off plates + 304L stainless steel fittings for EGR kit
  • Finish: Aluminized anti-corrosion coating for exhaust pipe; machined raw aluminum finish for EGR block plates
  • Weight: 27 lbs total bundle weight
  • Dimensions: Down pipe: 4" inlet diameter, 37" overall length
  • Warranty: 1 Year Limited Warranty against manufacturing defects

Why Choose EGR Performance

  • Premium Quality Materials: Aluminized steel exhaust pipe and CNC billet aluminum plates resist rust, heat fatigue and thermal stress for long service life.
  • Precision Engineering: CAD-designed for exact factory fitment, mandrel bent tubing for smooth exhaust gas flow and minimal turbulence.
  • Rigorous Testing: Every component passes 150psi pressure testing and 48-hour salt spray corrosion testing before shipping.
  • Dedicated Customer Support: Email us at mailto:service@egrperformance.com
  • Fast Shipping from USA Warehouse: Ship from our California warehouse, fast delivery for US customers.
  • 1 Year Limited Warranty: Covered against manufacturing defects for 1 full year.

Troubleshooting and Problem Solving

Common Issues After Installation

  • Check Engine Light: Usually requires tuner programming to disable factory DPF/EGR monitoring.
  • Rough Idle: Inspect for coolant leaks or loose intake / exhaust connections.
  • Reduced Power: Check exhaust pipe for crushed tubing or loose clamps causing exhaust leaks.
  • Coolant/Oil Leaks: Retorque EGR block-off plate bolts and inspect gaskets for damage.

Error Code Solutions

  • P0401: EGR Flow Insufficient - Normal after EGR delete; tuner programming required to clear the code.
  • P2002: DPF Efficiency Below Threshold - Requires tuner to shut off DPF sensor monitoring after hardware removal.
  • P2463: DPF Soot Accumulation - Tuner is required to disable DPF monitoring after delete hardware install.

How to Reset Check Engine Light After Installation

  1. Connect your compatible off-road tuner to the truck OBD2 port.
  2. Load the correct off-road tune file matched to your 6.7L Powerstroke.
  3. Follow tuner on-screen prompts to write the tune to ECU.
  4. Cycle ignition off/on, then clear stored diagnostic trouble codes via tuner menu.
  5. Start engine and verify check engine light is cleared.

What to Do If Your Vehicle Loses Power After Installation

  • Inspect all exhaust clamps for loose connections and exhaust leaks.
  • Verify the tuner tune file matches your exact VIN and truck configuration.
  • Check for boost leaks in intake piping and silicone hoses.
  • Confirm all coolant lines are properly routed with no kinks or restrictions.
  • Double check torque values on EGR delete plate mounting bolts.

Vehicle Fitment

This bundle fits 2011–2016 Ford F-250, F-350, F-450, F-550 Super Duty pickup trucks equipped with the 6.7L Powerstroke V8 diesel engine. The kit is designed for pickup body style trucks only. Cab & Chassis commercial chassis trucks, gasoline engines are NOT compatible. This package is direct bolt-on and no extra cutting or frame modification is required for matching pickup models.

For 100% fitment confirmation, please send your VIN number to mailto:service@egrperformance.com.

  1. Dispatch Time: Orders will be shipped within 24 hours after successful payment.
  2. Delivery Time: 2-5 business days after dispatch (delivery speed depends on proximity to warehouse location).
  3. Return Window:7 days for unsatisfactory items45 days for quality-related issues
  4. Refund Processing: Refunds will be processed back to your original payment method within 2-4 business days after receiving the automated refund confirmation email (subject to bank verification).

Frequently Asked Questions (FAQ)

What is a EGR Delete Kit + 4" Down Pipe Bundle?

This off-road bundle combines our EGR delete hardware kit and 4-inch aluminized steel turbo down pipe to remove factory EGR emissions hardware on your 2011–2016 6.7L Powerstroke truck.

How does a EGR Delete Kit + 4" Down Pipe Bundle work?

The EGR kit blocks hot soot exhaust gas from re-entering your intake manifold. The 4" down pipe opens exhaust flow from the turbo outlet, reducing backpressure and lowering EGT for heavy hauling.

What are the benefits of a EGR Delete Kit + 4" Down Pipe Bundle?

You get lower exhaust gas temperature, reduced carbon buildup, improved turbo response and extra horsepower when paired with a compatible off-road tuner.

Will a EGR Delete Kit + 4" Down Pipe Bundle void my warranty?

Modifying emissions components will typically void factory powertrain warranty. We recommend checking your dealer warranty terms before off-road modification.

Is a EGR Delete Kit + 4" Down Pipe Bundle legal in my state?

This product is for off-road racing use only. It is not legal for use on public highway roads in the United States. Local emission laws vary by state.

Do I need a tuner for a EGR Delete Kit + 4" Down Pipe Bundle?

Yes, a compatible off-road tuner is required. The tuner disables factory emission sensor monitoring and clears trouble codes after hardware installation.

How much horsepower does a EGR Delete Kit + 4" Down Pipe Bundle add?

Power gains depend on your tuner file, typical gains range from 40–80 HP when paired with a Mini Maxx V1 off-road tuner.

How much MPG gain can I expect from a EGR Delete Kit + 4" Down Pipe Bundle?

Most customers see 3-5% fuel efficiency improvement under steady highway and towing conditions when combined with proper off-road tuning.

How long does it take to install a EGR Delete Kit + 4" Down Pipe Bundle?

Professional installation usually takes 3–5 hours. DIY installation with proper tools may take longer depending on mechanical experience.

Can I install a EGR Delete Kit + 4" Down Pipe Bundle myself?

DIY installation is possible if you have diesel truck mechanical experience. Professional installation is strongly recommended for best results.

How often should I maintain my EGR Delete Kit + 4" Down Pipe Bundle?

Inspect gaskets, clamps and hoses every 5,000–10,000 miles and replace worn rubber components every 30,000 miles.

Will this EGR Delete Kit + 4" Down Pipe Bundle fit my 2015 Ford F350 6.7L Powerstroke?

Yes, this bundle fits all 2011–2016 Ford F250/F350/F450/F550 6.7L Powerstroke pickup trucks, including your 2015 F350. Send us your VIN for final verification.

What is the warranty on this EGR Delete Kit + 4" Down Pipe Bundle?

This bundle comes with a 1 Year Limited Warranty covering manufacturing defects. Damage from improper installation is not covered.

Do you offer technical support?

Absolutely. Email service@egrperformance.com with your VIN and part questions, our technical team will assist you.

How long does shipping take?

We ship from our California warehouse, standard US shipping usually takes 2–5 business days within the continental USA.

Can I return this EGR Delete Kit + 4" Down Pipe Bundle if it doesn't fit?

Contact our support team immediately. Returns are allowed for unused, un-installed parts within our return window, fitment confirmation via VIN is strongly recommended before ordering.

Installation Information

Installation Difficulty Level

Moderate

Estimated Installation Time

3–5 hours

Required Tools

  • Socket Set
  • Torque Wrench
  • Screwdrivers
  • Pliers
  • Coolant drain pan
  • Anti-seize compound

Step-by-Step Installation Overview

  1. Drain engine coolant and remove factory EGR valve and EGR cooler assembly.
  2. Install EGR block-off plates, stainless fittings and coolant bypass hoses from the EGR delete kit.
  3. Remove factory turbo outlet exhaust section and mount the new 4" aluminized steel down pipe.
  4. Torque all fasteners, inspect exhaust and coolant connections for leaks.
  5. Install compatible off-road tuner to reset ECU and clear factory emission fault codes.

Important Note: No printed installation instructions are included. Professional installation is highly recommended. If you need technical support, please contact us at mailto:service@egrperformance.com.