For 2009-2024 6.7L Cummins Ram 2500 3500 EGR Cooler Delete Kit

Installation - Related Questions

How difficult is it to install this EGR cooler delete kit?

The installation of this EGR upgrade kit is rated as 3 out of 5 wrenches, with 1 wrench being the easiest. This indicates a moderate level of difficulty. While individuals with some basic automotive knowledge and experience can attempt the installation, for a flawless and trouble - free setup, it is highly recommended to have it done by a professional mechanic. They have the expertise and tools to ensure proper installation, which can prevent potential issues such as leaks or improper component placement.

What tools do I need for the installation?

Although the kit comes with most of the necessary hardware like gaskets, hoses, bolts, support brackets, spacers, and a billet coolant re - route fitting, you may still need some basic automotive tools. These typically include a set of wrenches, sockets, screwdrivers, and possibly a torque wrench to ensure proper tightening of bolts. Having these tools on hand will make the installation process smoother and more efficient.

How long does the installation usually take?

The installation time can vary depending on your level of experience and the condition of your vehicle. For a professional mechanic, it may take around 2 - 4 hours to complete the installation. However, if you are doing it yourself and have limited experience, it could take significantly longer, possibly 6 - 8 hours or more. It's important to allocate enough time and work in a well - lit and organized space to avoid rushing the job.

Performance - Related Questions

What performance improvements can I expect after installing this kit?

By eliminating the traditional EGR system, you can expect several performance enhancements. Firstly, there will be no more soot buildup in the intake tract, which improves airflow and combustion efficiency. This leads to increased power output and better throttle response. Secondly, the optimized coolant re - routing to the back of the head between Cylinders #5 and #6 helps prevent overheating, allowing the engine to run at a more stable temperature. Overall, you'll experience a smoother driving experience, improved fuel economy, and potentially longer engine life.

Will this kit affect my vehicle's emissions?

Since this kit removes the EGR system, which is designed to reduce nitrogen oxide (NOx) emissions by recirculating exhaust gases, there will be an impact on emissions. However, it's important to note that in some areas, modifying or removing emission - related components may be against local regulations. Before installing this kit, you should check your local laws and regulations regarding vehicle emissions. Additionally, using an EGR upgrade - capable programmer or tuner (which is required for this kit) can help optimize the engine's performance while still complying with certain emission standards as much as possible.

How does the coolant re - routing in this kit benefit the engine?

The coolant re - routing to the back of the head between Cylinders #5 and #6 is a strategic design. These areas of the engine tend to get the hottest during operation. By directing coolant specifically to these hot spots, it improves the engine's thermal management. This helps prevent overheating, which can cause engine damage over time. Better coolant circulation also ensures that the engine components operate within their optimal temperature range, leading to more efficient performance and reduced wear and tear.

Compatibility - Related Questions

Is this EGR cooler delete kit compatible with my 2015 Ram 2500 with a 6.7L Cummins engine?

Yes, this EGR cooler delete kit is specifically designed to fit 2009 - 2024 Ram 2500 and 3500 trucks equipped with a 6.7L Cummins engine. So, it is fully compatible with your 2015 Ram 2500. The kit is engineered to integrate seamlessly with your vehicle's existing systems, providing a perfect fit and reliable performance.

Will this kit work with aftermarket engine parts that I have already installed?

In most cases, this EGR cooler delete kit can work with aftermarket engine parts, but it depends on the specific parts you have installed. If the aftermarket parts do not interfere with the installation of the EGR delete kit components, such as the stand - pipe bracket, intake blocker plate, or coolant re - route fittings, then there should be no problem. However, if the aftermarket parts modify the areas where the kit needs to be installed, it may require some adjustments or additional work. It's always a good idea to consult with a professional mechanic or the manufacturer if you have any doubts about compatibility with your existing aftermarket parts.

Maintenance - Related Questions

Do I need to perform any special maintenance after installing this kit?

After installing this EGR cooler delete kit, the maintenance requirements are generally reduced compared to having the EGR system in place. Since there is no more EGR cooler, crossover tube, or actuator, you won't have to deal with soot buildup and the associated cleaning tasks. However, it's still important to perform regular engine maintenance, such as oil changes, air filter replacements, and coolant flushes. Additionally, you should monitor the engine's performance and temperature regularly to ensure that everything is running smoothly.

How often should I check the components of this kit for any issues?

It's a good practice to visually inspect the components of this EGR cooler delete kit during your regular engine maintenance intervals. For example, when you perform an oil change, take a few minutes to check the hoses, gaskets, and block - off plates for any signs of leaks, cracks, or damage. If you notice any issues, such as a coolant leak from the re - route fittings or a loose block - off plate, address them immediately to prevent further damage to the engine.