Body Cab Mount Bushing Kit for Ford F150 F250 F350 (1980-1998)

x-tinymce/html

Product Overview

• Body cab mount bushing kitfor Ford full size trucks.
• Designed to replace deteriorated factory rubber body mount bushings.
• Helps address body mount wear, vibration, noise, and cab alignment issues.
• Polyurethane construction with black finish for daily and off road use.
• Direct replacement fitment for listed 2WD and 4WD models.

Ideal For

• Worn cab mounts: Solve cracked or deteriorated body mount bushing issues.
• Truck vibration: Solve vibration caused by degraded cab support points.
• Cab alignment service: Solve cab to bed alignment concerns from worn mounts.
• Frame service: Solve missing hardware concerns with included kit parts.
• Street and off road use: Solve body mount wear from regular driving.

Technical Specifications

• Product Type: Body Cab Mount Bushing Kit.
• Part Type: Body mount bushings and mounting hardware.
• Total Pieces: 58 pieces.
• Material: Polyurethane.
• Color: Black.
• Surface Finish: Polished.
• Fitment Type: Direct replacement.
• Drive Compatibility: 2WD and 4WD.
• Placement: Left, right, front, upper, lower, and rear.
• Mounting Hardware Included: Yes.
• Warranty: 1 Year Limited Warranty against manufacturing defects.
• Installation Manual: No printed installation manual included.

Why Choose EGR Performance

• Fitment Support: Solve compatibility concerns with VIN support by email.
• Warranty Coverage: Solve defect concerns with 1 Year Limited Warranty against manufacturing defects.
• Complete Kit Supply: Solve missing component concerns with a 58 piece kit.
• US Truck Focus: Solve fitment confusion for Ford F150 F250 F350 owners.
• After Sales Support: Solve product questions at service@egrperformance.com.

Installation Information

Installation Difficulty Level

Moderate

Estimated Installation Time

3 to 5 hours

Required Tools

• Floor jack and jack stands.
• Socket set and ratchet.
• Torque wrench.
• Breaker bar.
• Penetrating oil.
• Body support blocks.

Step-by-Step Installation Overview

• Park on level ground and support the truck safely.
• Loosen one side of body mount hardware at a time.
• Raise the cab only enough to remove old bushings.
• Install new mounts, sleeves, washers, bolts, and lock nuts.
• Recheck alignment and tighten hardware securely.

No printed instructions included. Professional installation is highly recommended. For technical support, contact service@egrperformance.com.

Troubleshooting and Problem Solving

Common Issues After Installation

• Cab not sitting level: Mount stack order may be incorrect.
• New vibration: Hardware may be loose or unevenly tightened.
• Door gap change: Cab alignment may need to be rechecked.
• Washer noise: Washer or sleeve position may be incorrect.
• Bolt binding: Frame bracket or body mount hole may be misaligned.

Error Code Solutions

• No DTC: This mechanical kit does not connect to the OBD system.
• Unrelated DTC: Scan the vehicle and repair the listed system separately.
• Warning light after service: Check disconnected sensors near work areas.

How to Reset Check Engine Light After Installation

• Confirm no electrical connectors were disturbed during service.
• Scan the vehicle with an OBD tool if a light appears.
• Repair any unrelated stored fault before clearing codes.
• Clear codes only after the root cause is corrected.

What to Do If Your Vehicle Loses Power After Installation

• Inspect for pinched wiring or hoses near lifted cab areas.
• Check battery terminals and ground straps.
• Scan for unrelated engine or transmission codes.
• Stop driving if abnormal noise or severe vibration occurs.

Core Advantages

• 58 Piece Kit: Includes bushings, sleeves, washers, bolts, and lock nuts.
• Polyurethane Material: Replaces aging rubber with fluid resistant material.
• Hardware Included: Includes6 boltsand6 lock nuts.
• Full Position Coverage: Covers left, right, front, upper, lower, and rear locations.
• 2WD and 4WD Fitment: Supports both driveline layouts listed for the trucks.

Complete Package Contents

• 6upper body mounts.
• 6lower body mounts.
• 6metal sleeves.
• 2clipped washers.
• 26washers.
• 6bolts.
• 6lock nuts.
• 58total pieces.

Long-Term Maintenance Tips

• Mount Hardware: Inspect every 6 months and tighten loose fasteners.
• Cab Alignment: Inspect every 12 months to prevent uneven body gaps.
• Washer Position: Inspect after first 500 miles to prevent hardware noise.
• Bushing Condition: Inspect every oil change for cracks or deformation.
• Road Grime: Clean during chassis service to reduce buildup around mounts.