2 Inch Front Leveling Lift Kit for Toyota Tundra Sequoia (2007-2022)

$54.38
Shipping calculated at checkout.
30 in stock, ready to ship
🛒 Bulk Discount: Save 6% on 2+ Items
🎁 Special Offer: Enjoy 10% Off on 3+ Items
📞 Large Orders (10+): Contact Us for Exclusive Deals
Details

 

Brand Model Year Engine Model
Toyota Tundra 2WD 4WD 2007-2022 Suspension fitment not engine specific
Toyota Sequoia 2WD 4WD 2007-2021 Suspension fitment not engine specific

✅ Exact Fitment Guarantee | If you are unsure about compatibility, contact us at service@egrperformance.com with your VIN.

Intro Section

  • 2 Inch Front Leveling Lift Kit helps reduce factory front rake.
  • Fits for Toyota Tundra and for Toyota Sequoia 2WD 4WD models.
  • Raises front ride height by 2 inches with a non 1 to 1 spacer ratio.
  • Review fitment, exclusions, tools, and install notes before ordering.
Shipping Details

Ontario CA / Springdale OH / Newark NJ

Package List

Complete Package Contents

  • Quantity 2:Front strut spacer leveling lift components.
  • Quantity 1 Pack:Fixing screws and mounting hardware.
  • Quantity 1 Set:Complete front leveling lift kit.
Delivery Time

2-5 working days inland in the United States

Product details

x-tinymce/html

Product Overview

  • Product Type:Front suspension leveling lift kit.
  • Lift Height:2 inch front ride height increase.
  • Placement:Left front and right front strut spacer locations.
  • Purpose:Levels front and rear stance on compatible vehicles.
  • Install:No cutting or drilling required.

Ideal For

  • Front Rake Correction:Solve low front factory stance.
  • Wheel Clearance Setup:Solve limited front tire clearance needs.
  • 2WD 4WD Truck Leveling:Solve uneven front to rear height.
  • Strut Spacer Upgrade:Solve need for bolt on front leveling.

Technical Specifications

  • Brand:EGR Performance.
  • Part Type:Suspension lift kit.
  • Kit Type:2 inch front leveling lift kit.
  • Material:6061 aluminum alloy.
  • Surface Finish:Black anodized finish.
  • Spacer Thickness:30.48 mm.
  • Lift Height:2 inch front lift.
  • Lift Ratio:Spacer thickness is not 1 to 1 with lift height.
  • Vehicle Placement:Left, right, front.
  • Drive Type:2WD and 4WD.
  • Included Hardware:Mounting hardware and fixing screws.
  • Installation Time:1 to 2 hours.

Why Choose EGR Performance

  • Fitment Support:Solve compatibility concerns with VIN help.
  • Warranty Support:Solve defect concerns with 1 Year Limited Warranty.
  • USA Buyer Support:Solve order questions at service@egrperformance.com.
  • Clear Specs:Solve install planning with listed dimensions.

Installation Information

Installation Difficulty Level

Moderate

Estimated Installation Time

1 to 2 hours

Required Tools

  • Floor jack and jack stands.
  • Metric socket set.
  • Combination wrenches.
  • Torque wrench.
  • Spring and strut safe work area.

Step-by-Step Installation Overview

  • Park on level ground and secure the vehicle.
  • Lift the front and remove both front wheels.
  • Install spacers at the front strut mount locations.
  • Reinstall hardware and torque fasteners.
  • Check alignment after installation.

No printed instructions included. Professional installation is highly recommended. For technical support, contact service@egrperformance.com.

Troubleshooting and Problem Solving

Common Issues After Installation

  • Uneven Ride Height:Vehicle was not measured on level ground.
  • Front End Noise:Hardware may need torque verification.
  • Steering Pull:Wheel alignment may be required after install.
  • Spacer Fit Concern:Lift height and spacer thickness are not 1 to 1.

Error Code Solutions

  • No DTC:This spacer kit has no engine electrical connection.
  • ABS Light:Inspect wheel speed sensor wiring if disturbed.
  • VSC Light:Scan the vehicle and check alignment related conditions.

How to Reset Check Engine Light After Installation

  • Confirm the light is not from an unrelated engine issue.
  • Scan diagnostic codes with an OBD2 scanner.
  • Repair the listed fault before clearing codes.
  • Clear codes and complete a short road test.

What to Do If Your Vehicle Loses Power After Installation

  • Stop driving and inspect for unrelated engine DTCs.
  • Verify no wiring was pulled during front suspension work.
  • Check wheel speed sensor routing near both front wheels.
  • Contact service@egrperformance.com with vehicle details.

Core Advantages

  • 2 Inch Front Lift:Raises front ride height by 2 inches.
  • 6061 Aluminum Body:Uses CNC machined 6061 aluminum alloy.
  • 30.48 mm Spacer:Uses 1.2 inch spacer thickness.
  • Fast Install Design:Installs in 1 to 2 hours.
  • No Cut Fitment:Requires 0 cutting and 0 drilling.

Complete Package Contents

  • Quantity 2:Front strut spacer leveling lift components.
  • Quantity 1 Pack:Fixing screws and mounting hardware.
  • Quantity 1 Set:Complete front leveling lift kit.

Long-Term Maintenance Tips

  • Fastener Check:Inspect after 50 miles to prevent loose hardware.
  • Alignment Check:Inspect after install to prevent tire wear.
  • Front Suspension Check:Inspect every oil change for noise issues.
  • Corrosion Check:Inspect every 6 months and clean road debris.

x-tinymce/html

Vehicle Fitment

  • Fits for2007 2022 Toyota Tundra2WD 4WD.
  • Does not fit Tundra Rock Warrior model.
  • Does not fit Tundra models with TRD suspension.
  • Fits for2007 2021 Toyota Sequoia2WD 4WD.
  • Does not fit Sequoia Platinum with electronic front struts.
  • Does not fit Sequoia Limited with electronic front struts.
  • Send your VIN to service@egrperformance.com before ordering if unsure.
  1. Dispatch Time: Orders will be shipped within 24 hours after successful payment.
  2. Delivery Time: 2-5 business days after dispatch (delivery speed depends on proximity to warehouse location).
  3. Return Window:7 days for unsatisfactory items45 days for quality-related issues
  4. Refund Processing: Refunds will be processed back to your original payment method within 2-4 business days after receiving the automated refund confirmation email (subject to bank verification).

x-tinymce/html

Will this 2 Inch Front Leveling Lift Kit fit my Toyota Tundra?

It fits for 2007 2022 Toyota Tundra 2WD 4WD, except Rock Warrior or TRD suspension models.

Will this kit fit my Toyota Sequoia?

It fits for 2007 2021 Toyota Sequoia 2WD 4WD, except Platinum or Limited models with electronic front struts.

How much front lift does this kit provide?

This kit raises the front of the vehicle by 2 inches.

Is the spacer thickness the same as the lift height?

No. The spacer is 30.48 mm thick, and suspension geometry is not a 1 to 1 ratio.

Does this kit work on 2WD and 4WD vehicles?

Yes. The listed fitment includes compatible 2WD and 4WD models.

Does the kit include both front spacers?

Yes. The package includes 2 front leveling lift components.

Are mounting screws included?

Yes. The package includes 1 pack of fixing screws and mounting hardware.

Do I need to cut or drill during installation?

No. The source data states no cutting and no drilling are required.

How long does installation take?

Estimated installation time is 1 to 2 hours.

Are printed instructions included?

No printed instructions included. Professional installation is highly recommended.

Do I need an alignment after installation?

Alignment inspection is recommended after front suspension height changes.

What material is used?

The kit is made from 6061 aluminum alloy.

What finish is on the spacers?

The spacers use a black anodized finish.

Will this fit a Tundra Rock Warrior model?

No. The source fitment excludes Tundra Rock Warrior models.

Will this fit a Tundra with TRD suspension?

No. The source fitment excludes Tundra models with TRD suspension.

What warranty is included?

EGR Performance includes a 1 Year Limited Warranty against manufacturing defects.