EGR Performance DPF Delete Tuner Kit
DPF Delete Mini Maxx V2 Combo for 6.7L Cummins Dodge RAM
DPF Delete Tuner Kit front view with CCV Plug
DPF Delete Combo included parts with CCV Plug
Mini Maxx V2 Tuner with CCV Plug connector
6.7L Cummins DPF Delete Pipe with CCV Plug
DPF Delete Tuner installation kit with CCV Plug adapter
EGR Performance DPF Delete Tuner Kit
DPF Delete Mini Maxx V2 Combo for 6.7L Cummins Dodge RAM
DPF Delete Tuner Kit front view with CCV Plug
DPF Delete Combo included parts with CCV Plug
Mini Maxx V2 Tuner with CCV Plug connector
6.7L Cummins DPF Delete Pipe with CCV Plug
DPF Delete Tuner installation kit with CCV Plug adapter

DPF Delete Pipe Mini Maxx V2 Tuner Kit for 6.7L Cummins Dodge RAM 2500 3500 2010-2019

$999.99
Shipping calculated at checkout.
Type: DPF Delet & MiniMaxx V2 Tuner
100 in stock, ready to ship
🛒 Bulk Discount: Save 6% on 2+ Items
🎁 Special Offer: Enjoy 10% Off on 3+ Items
📞 Large Orders (10+): Contact Us for Exclusive Deals
Details

Upgrade your 2010-2019 6.7L Cummins RAM 2500/3500 with our DPF delete + Mini Maxx V2 tuner bundle. In stock at US warehouses for fast delivery.

This all-in-one kit removes DPF limits, boosts horsepower, improves MPG and clears check engine lights. For off-road use, with precision fitment and US-based support.

Brand Model Year Engine Model
Dodge RAM 2500 Pickup 2010-2019 6.7L Cummins Diesel
Dodge RAM 3500 Pickup 2010-2019 6.7L Cummins Diesel

✅ Exact Fitment Guarantee | If unsure about compatibility, contact service@egrperformance.com with your VIN number.

Our DPF Delete Pipe Mini Maxx V2 Tuner Combo Kit for 2010-2019 Dodge RAM 2500 3500 6.7L Cummins is a full off-road delete solution with power gains and no regen cycles. Read on for fitment, install and performance details.

Product Overview

  • This bundle pairs a high-flow 4-inch DPF delete pipe with the Mini Maxx V2 tuner for 6.7L Cummins RAM trucks.
  • It removes factory DPF and catalytic converter, and disables ECU emissions monitoring.
  • Preloaded tunes prevent CEL and limp mode, cut backpressure and end DPF maintenance and regens.
  • For off-road and competition use only.

Ideal For

  • Towing and Hauling: Adds low-end torque and stops regen interruptions for steady pulling under heavy loads.
  • Daily Driving: Improves throttle response and fuel economy while cutting DPF downtime and service costs.
  • Off-Road Use: Optimizes exhaust flow and power for trails, racing and dedicated off-road builds.
  • Engine Performance Upgrades: Serves as the base upgrade for 6.7L Cummins builds with adjustable tunes.
Shipping Details

Ontario CA / Springdale OH / Newark NJ / Houston TX
*Based on your shipping address, we'll pick the closest warehouse to ship from. Since some product isn't stored in the same warehouse, you might get several packages.
Package List

6.7L Cummins DPF Delete 2010-2019

6.7L Cummins EGR Delete 2013-2019

6.7L Cummins EGR Delete 2009-2024

6.7L Cummins Mini Maxx Tuner V2

6.7L Cummins Tuner Harness Plug Kit 2013-2015

6.7L Cummins Tuner Harness Plug Kit 2016-2018

6.7L Cummins CCV Reroute
Delivery Time

2-5 working days inland in the United States
Attention
Legal Disclaimer EGR DPF Delete Offroad Use Only

LEGAL DISCLAIMER

This product may NEVER be installed on a vehicle registered for highway or public street use. By installing this product onto your vehicle, you assume all risk and liability associated with its use. It is your responsibility to make sure your vehicle complies with all federal, state, and local emissions laws.

Federal and many state and local laws prohibit the removal, modification or rendering inoperative of any part of the design affecting emissions or safety on motor vehicles used on a public street or highway. Violation may result in a fine of up to $32,500 per vehicle (or possibly higher depending on changes in the law). All civil penalties and fines for removing your vehicle's emissions equipment are the sole responsibility of the end user.

No other applications besides off-road competition racing use are intended or implied. Depending on where you live, additional restrictions may apply. Check all applicable laws before installing or using.

Not available for sale or use in the state of California, Colorado and Arizona.
Type

Product details

Core Advantages

  • Increased Horsepower and Torque: Eliminates exhaust backpressure and unlocks factory-locked power, delivering gains of up to 120+ horsepower and 250+ ft-lbs of torque with the included performance tune.
  • Improved Fuel Efficiency: Optimizes combustion and eliminates fuel-wasting regeneration cycles, delivering 3–5 MPG improvements under typical highway and steady-state driving conditions.
  • Reduced Engine Temperature: Improves exhaust gas flow to lower EGTs, reducing heat stress on the turbo and engine internals especially during sustained towing.
  • Extended Engine Life: Removes soot buildup and DPF failure risks, reducing wear on critical engine components and extending overall service life.
  • Direct Bolt-On Installation: Precision-engineered exhaust pipe and plug-and-play OBD tuner require no custom fabrication for standard 2500/3500 pickup models.
  • All-In-One Kit: Includes every required exhaust component and a fully pre-loaded tuner with CCV plug support, so no additional parts are needed for a complete DPF/EGR/DEF delete.

Technical Specifications

  • Exhaust Pipe Material: SUS409 stainless steel
  • Tuner Construction: Automotive-grade ABS housing with high-contrast LCD display
  • Finish: Natural steel finish on exhaust pipe; matte black tuner casing
  • Exhaust Inlet Diameter: 4 inches
  • Exhaust Pipe Thickness: 2mm
  • Tune Support: DPF, EGR, DEF delete with multiple power levels
  • Warranty: 1 Year Limited Warranty against manufacturing defects

Why Choose EGR Performance

  • Premium Quality Materials: Built with corrosion-resistant SUS409 steel and automotive-grade electronic components tested for extreme heat and vibration.
  • Precision Engineering: CNC-machined exhaust flanges and pre-calibrated Cummins-specific tunes ensure exact fitment and reliable, consistent performance.
  • Rigorous Testing: All components undergo pressure, temperature, and vibration testing to withstand harsh diesel exhaust conditions and 30+ PSI of boost.
  • Dedicated Customer Support: Email us at service@egrperformance.com for fitment, installation, and tuning support.
  • Fast Shipping from USA Warehouse
  • 1 Year Limited Warranty

Troubleshooting and Problem Solving

Common Issues After Installation

  • Check Engine Light
  • Rough Idle
  • Reduced Power
  • Exhaust Leaks
  • Tuner Communication Failure

Error Code Solutions

  • P2002: Diesel Particulate Filter Efficiency Below Threshold – Confirm the delete tune is fully flashed to the ECU, then clear all codes using the Mini Maxx V2 tuner.
  • P2463: Diesel Particulate Filter Restriction – Soot Accumulation – Verify DPF pressure sensors are disconnected or disabled in the tune, then reflash and clear codes.
  • P0403: EGR Control Circuit Malfunction – Ensure the EGR system is fully disabled in the selected tune file and all related sensor connectors are secured.

How to Reset Check Engine Light After Installation

  1. Plug the Mini Maxx V2 tuner into the vehicle’s OBD-II diagnostic port.
  2. Navigate to the DTC diagnostic menu on the tuner display.
  3. Select the “Clear All Codes” option and wait for the process to finish.
  4. Turn the ignition off for 30 seconds, then restart the engine to confirm the light is extinguished.

What to Do If Your Vehicle Loses Power After Installation

  • Confirm the correct tune file for your 2010–2019 6.7L Cummins model year is loaded on the tuner.
  • Inspect all exhaust pipe connections for leaks that can cause pressure loss and reduced performance.
  • Verify all factory emissions sensors are properly disconnected or disabled within the tune profile.
  • Clear all stored diagnostic trouble codes and perform a short test drive to re-evaluate power delivery.

Long-Term Maintenance Tips

  • Regular Inspection: Inspect exhaust connections, clamps, and hangers every 5,000–10,000 miles for loosening, leaks, or surface corrosion.
  • Routine Maintenance: Update Mini Maxx V2 tuner firmware once per year using the included SD card to maintain optimal tune performance and compatibility.
  • Wear Parts Replacement: Replace exhaust clamps and rubber hangers every 50,000 miles if signs of wear, rust, or fatigue appear.
  • Hardware Check: Retorque all exhaust mounting bolts every 10,000 miles to prevent vibration-related loosening and exhaust leaks.
  • Storage Tips: Store the tuner in a cool, dry place when not installed; avoid prolonged exposure to direct sunlight, extreme heat, or moisture.
  • Warranty Reminder: Following these maintenance guidelines will keep your 1 Year Limited Warranty valid.

Vehicle Fitment

This DPF Delete Pipe Mini Maxx V2 Tuner Combo Kit is engineered for a direct fit on all 2010–2019 Dodge RAM 2500 and 3500 pickup trucks equipped with the 6.7L Cummins diesel engine. The exhaust pipe requires no cutting or fabrication for standard pickup models; the tuner connects directly to the OBD-II port for plug-and-play tuning.

This kit is not compatible with cab & chassis models, California emissions-compliant vehicles, or trucks with factory-modified aftertreatment systems. For 100% fitment confirmation, please send your VIN number to service@egrperformance.com

  1. Dispatch Time: Orders will be shipped within 24 hours after successful payment.
  2. Delivery Time: 2-5 business days after dispatch (delivery speed depends on proximity to warehouse location).
  3. Return Window:7 days for unsatisfactory items45 days for quality-related issues
  4. Refund Processing: Refunds will be processed back to your original payment method within 2-4 business days after receiving the automated refund confirmation email (subject to bank verification).

Frequently Asked Questions (FAQ)

What is a DPF Delete Pipe Mini Maxx V2 Tuner Combo Kit?

This is a complete off-road emissions delete bundle for 6.7L Cummins RAM trucks, combining a high-flow replacement exhaust pipe and a pre-programmed diesel tuner. It removes factory DPF restrictions while disabling related engine fault codes.

How does a DPF delete and tuner combo work?

The delete pipe physically replaces the restrictive DPF and catalytic converter to improve exhaust flow and reduce backpressure. The Mini Maxx V2 tuner reprograms the ECU to disable emissions monitoring and unlock factory-locked performance.

What are the benefits of a DPF delete tuner combo?

The primary benefits include increased horsepower and torque, improved fuel economy, eliminated regeneration cycles, and lower long-term maintenance costs. It also delivers sharper throttle response and lower exhaust gas temperatures.

Will a DPF delete tuner combo void my warranty?

Modifying factory emissions systems can impact your vehicle’s original factory warranty coverage. This kit is intended exclusively for off-road use on vehicles not operated on public roads.

Is a DPF delete tuner combo legal in my state?

No, removing factory emissions equipment is not legal for on-road use under US federal law and most state regulations. This product is designed and sold for off-road and competition use only.

Do I need a tuner for a DPF delete pipe?

Yes, a compatible delete tuner is required when installing a DPF delete pipe. Without proper tuning, the truck will trigger check engine lights, throw fault codes, and enter limp mode within a short drive.

How much horsepower does this DPF delete combo add?

When paired with the included Mini Maxx V2 performance tune, this combo can add up to 120+ horsepower and 250+ ft-lbs of torque to a 6.7L Cummins. Exact gains vary by model year and selected tune level.

How much MPG gain can I expect from this combo?

Most drivers see 3–5 MPG improvements after installing the DPF delete and tuner combo. Gains are most noticeable during steady highway cruising and consistent-speed driving.

How long does it take to install this combo kit?

A typical installation takes 3–5 hours for someone with moderate mechanical experience and standard tools. Professional installation is recommended for best results and leak-free fitment.

Can I install this DPF delete combo myself?

DIY installation is possible with basic mechanical skill and standard garage tools. However, professional installation is highly recommended to avoid exhaust leaks and tuning errors.

How often should I maintain my DPF delete combo kit?

Inspect all exhaust hardware and connections every 5,000–10,000 miles. Update your Mini Maxx V2 tuner firmware approximately once per year to maintain optimal performance.

Will this kit fit my 2015 Dodge RAM 2500 6.7L Cummins?

Yes, this combo kit is designed for all 2010–2019 Dodge RAM 2500 and 3500 pickup trucks with the 6.7L Cummins diesel engine. For 100% fitment confirmation, send your VIN to our support team.

What is the warranty on this combo kit?

This kit comes with a 1 Year Limited Warranty against manufacturing defects in materials and workmanship. The warranty applies under normal off-road use and proper maintenance.

Do you offer technical support for installation?

Yes, we provide email-based technical support for fitment and installation questions. Reach out to service@egrperformance.com with your order number and VIN for assistance.

How long does shipping take?

Orders are typically processed within 24 hours from our network of US warehouses. Standard ground delivery takes 2–5 business days depending on your shipping location.

Can I return this kit if it doesn’t fit?

We offer a 45-day return policy for unused, uninstalled products in their original packaging. Original shipping costs are non-refundable, and restocking fees may apply to certain items.

Installation Information

Installation Difficulty Level

Moderate

Estimated Installation Time

3-5 hours

Required Tools

  • Socket Set
  • Torque Wrench
  • Screwdrivers
  • Pliers
  • Exhaust Hanger Removal Tool
  • Penetrating Oil

Step-by-Step Installation Overview

  1. Disconnect the vehicle battery, then remove the factory DPF, catalytic converter, and associated exhaust hangers and hardware.
  2. Mount the new DPF delete pipe using the included clamps, hangers, and mounting bolts, and tighten to factory torque specifications.
  3. Plug the Mini Maxx V2 tuner into the OBD-II port and follow the on-screen prompts to flash the pre-loaded delete tune to the ECU.
  4. Inspect all exhaust connections for leaks and verify the tuner has successfully communicated with the engine control module.
  5. Reconnect the battery, start the engine, clear all stored diagnostic codes, and confirm proper system operation.

Important Note: No printed installation instructions are included. Professional installation is highly recommended. If you need technical support, please contact us at service@egrperformance.com.