Full unit shot 8 inch fuel filter collar vent cap wrench for DD13 DD15 DD16 Navistar unspecified years
Front view 8 inch fuel filter collar vent cap wrench for DD13 DD15 DD16 Navistar unspecified years
Kit layout 8 inch fuel filter collar vent cap wrench installation kit for DD13 DD15 DD16 Navistar unspecified years
Laid flat 8 inch fuel filter collar vent cap wrench included parts for DD13 DD15 DD16 Navistar unspecified years
Official studio shot EGR Performance 8 inch fuel filter collar vent cap wrench for DD13 DD15 DD16 Navistar unspecified years
Fuel Filter Collar Vent Cap Wrench for DD13 DD15 DD16 Diesel Engines - image 6
Fuel Filter Collar Vent Cap Wrench for DD13 DD15 DD16 Diesel Engines - image 7
Full unit shot 8 inch fuel filter collar vent cap wrench for DD13 DD15 DD16 Navistar unspecified years
Front view 8 inch fuel filter collar vent cap wrench for DD13 DD15 DD16 Navistar unspecified years
Kit layout 8 inch fuel filter collar vent cap wrench installation kit for DD13 DD15 DD16 Navistar unspecified years
Laid flat 8 inch fuel filter collar vent cap wrench included parts for DD13 DD15 DD16 Navistar unspecified years
Official studio shot EGR Performance 8 inch fuel filter collar vent cap wrench for DD13 DD15 DD16 Navistar unspecified years
Fuel Filter Collar Vent Cap Wrench for DD13 DD15 DD16 Diesel Engines - image 6
Fuel Filter Collar Vent Cap Wrench for DD13 DD15 DD16 Diesel Engines - image 7

Fuel Filter Collar Vent Cap Wrench for DD13 DD15 DD16 Diesel Engines

$38.06
Shipping calculated at checkout.
30 in stock, ready to ship
🛒 Bulk Discount: Save 6% on 2+ Items
🎁 Special Offer: Enjoy 10% Off on 3+ Items
📞 Large Orders (10+): Contact Us for Exclusive Deals
Details

 

Brand Model Year Engine Model
Detroit Diesel DD13 equipped applications Verify by filter housing DD13
Detroit Diesel DD15 equipped applications Verify by filter housing DD15
Detroit Diesel DD16 equipped applications Verify by filter housing DD16
Cummins Diesel engine applications Verify by filter housing Cummins diesel engine
Navistar Diesel engine applications Verify by filter housing Navistar diesel engine

✅ Exact Fitment Guarantee | If you are unsure about compatibility, contact us at service@egrperformance.com with your VIN.

Intro Section

  • Fuel filter collar wrench helps remove stubborn filter rings.
  • Fits 482, 483, 485, 487, 488, 782 housings for DD13, DD15, DD16.
  • 8 inch inner diameter steel tool supports diesel filter service.
  • Check the fitment, specifications, package list, and installation notes below.
Shipping Details

Ontario CA / Springdale OH / Newark NJ
Package List

Complete Package Contents

  • 1fuel filter collar vent cap wrench.
Delivery Time

2-5 working days inland in the United States

Product details

x-tinymce/html

Product Overview

  • 8 inch fuel filter wrenchfor collar and vent cap removal.
  • Made from solid steel with polished finish.
  • Round head style fits specified fuel filter collars.
  • Blue soft plastic coated handle supports grip control.
  • Use during fuel water separator filter service.

Ideal For

  • Diesel filter service: Solve stuck filter collar removal.
  • Fuel water separator work: Solve hard to loosen vent cap issues.
  • Fleet maintenance: Solve repeated collar removal tool needs.
  • Shop repair use: Solve filter ring damage from wrong tools.

Technical Specifications

  • Product Type: Diesel fuel filter collar vent cap wrench.
  • Reference Number: replacement for 482017.
  • Filter Series: 482, 483, 485, 487, 488, 782.
  • Inner Diameter: 8 inches.
  • Length: 15.75 inches.
  • Width: 9.06 inches.
  • Package Dimensions: 15.59 x 11.61 x 0.75 inches.
  • Weight: 0.97 pounds.
  • Material: Solid steel.
  • Handle: Blue soft plastic coating.
  • Head Style: Round.
  • Finish Type: Polished.
  • Country of Origin: China.
  • Unit Count: 1.0.

Why Choose EGR Performance

  • Fitment Support: Solve uncertainty with VIN help by email.
  • Warranty Support: 1 Year Limited Warranty against manufacturing defects.
  • Clear Specs: Solve wrong-tool risk with measured dimensions.
  • Diesel Service Focus: Solve collar removal needs on listed applications.

Installation Information

Installation Difficulty Level

Easy

Estimated Installation Time

0.1-0.3 hours

Required Tools

  • Shop gloves.
  • Safety glasses.
  • Clean shop towel.
  • Drain pan if fuel service is required.

Step-by-Step Installation Overview

  • Confirm the filter collar matches the 8 inch wrench size.
  • Seat the wrench jaws evenly on the collar.
  • Pull in the correct loosening direction.
  • Remove the collar or vent cap carefully.
  • Inspect the housing before reinstalling parts.

No printed instructions included. Professional installation is highly recommended. For technical support, contact service@egrperformance.com.

Troubleshooting and Problem Solving

Common Issues After Installation

  • Tool slips: Collar size or jaw position is not matched.
  • Housing marks: Metal teeth contacted the housing surface.
  • Collar will not move: Filter ring is over tightened or contaminated.
  • Poor grip: Handle or collar surface has fuel residue.

Error Code Solutions

  • No DTC Stored: This hand tool does not connect to OBD systems.
  • Fuel system code after service: Recheck filter sealing and connections.
  • Check engine light after filter work: Scan vehicle before driving.

How to Reset Check Engine Light After Installation

  • Confirm fuel system service is complete.
  • Use an OBD scan tool to read stored codes.
  • Repair any active fuel system fault first.
  • Clear codes only after the root issue is fixed.

What to Do If Your Vehicle Loses Power After Installation

  • Stop driving and inspect the serviced fuel filter area.
  • Check for loose caps, leaks, or air in the fuel system.
  • Verify the correct filter service procedure was followed.
  • Contact a professional diesel technician if power loss continues.

Core Advantages

  • 8 Inch Collar Coverage: Matches 8 inch inner diameter applications.
  • 15.75 Inch Tool Length: Provides measured reach during service.
  • 9.06 Inch Tool Width: Supports collar engagement area.
  • 0.97 Pound Weight: Keeps the hand tool manageable.
  • 1 Piece Design: Includes one dedicated fuel filter wrench.

Complete Package Contents

  • 1fuel filter collar vent cap wrench.

Long-Term Maintenance Tips

  • Tool Cleaning: After each use, wipe fuel residue from steel surfaces.
  • Handle Check: Before each use, inspect coating for grip damage.
  • Jaw Inspection: Before each use, check teeth to prevent slipping.
  • Dry Storage: After each job, store dry to help prevent surface corrosion.

x-tinymce/html

Vehicle Fitment

  • For Detroit Diesel DD13 applications using listed filter housings.
  • For Detroit Diesel DD15 applications using listed filter housings.
  • For Detroit Diesel DD16 applications using listed filter housings.
  • For Cummins diesel engine applications using listed filter housings.
  • For Navistar diesel engine applications using listed filter housings.
  • For 482, 483, 485, 487, 488, and 782 filter series.
  • Use as replacement for 482017 reference tool applications.
  • Not for collars that do not measure 8 inches inner diameter.
  • Contact service@egrperformance.com with your VIN before ordering.
  1. Dispatch Time: Orders will be shipped within 24 hours after successful payment.
  2. Delivery Time: 2-5 business days after dispatch (delivery speed depends on proximity to warehouse location).
  3. Return Window:7 days for unsatisfactory items45 days for quality-related issues
  4. Refund Processing: Refunds will be processed back to your original payment method within 2-4 business days after receiving the automated refund confirmation email (subject to bank verification).

x-tinymce/html

What is this fuel filter collar wrench used for?

It is used to remove fuel filter collars and vent caps on listed diesel filter housings.

Does this wrench replace 482017?

Yes. The listed reference application is replacement for 482017.

What size is the wrench?

The wrench has an8 inch inner diameter.

Which engine models are listed?

The listing includes DD13, DD15, DD16, Cummins diesel, and Navistar diesel applications.

Which filter housing series are listed?

The listed series are 482, 483, 485, 487, 488, and 782.

Is this an OEM factory original tool?

No. This is an EGR Performance aftermarket service tool, not an OEM factory original tool.

What material is the wrench made from?

The wrench is made from solid steel with a polished finish.

Does the handle have coating?

Yes. The handle has a blue soft plastic coating.

How many pieces are included?

The package includes1fuel filter collar vent cap wrench.

Will it fit every diesel fuel filter?

No. Measure the collar and confirm the listed 8 inch inner diameter fit before ordering.

Can this tool damage the filter housing?

Improper use can mark the housing. Seat the jaws correctly and pull in the right direction.

Are printed instructions included?

No printed instructions are included. Professional installation is highly recommended.

What is the package size?

The package dimensions are 15.59 x 11.61 x 0.75 inches.

What is the product weight?

The listed weight is0.97 pounds.

How do I verify fitment before buying?

Email service@egrperformance.com with your VIN and filter housing information.

What warranty is included?

It includes a 1 Year Limited Warranty against manufacturing defects.