Angled full unit black intake manifold throttle cable bracket for 6.2L L92 GM truck 2007 to 2013
Front view black intake manifold throttle cable bracket for 6.2L L92 GM truck 2007 to 2013
Installation kit layout black intake manifold throttle cable bracket for 6.2L L92 GM truck 2007 to 2013
Included parts laid flat black intake manifold throttle cable bracket for 6.2L L92 GM truck 2007 to 2013
EGR Performance black intake manifold throttle cable bracket for 6.2L L92 GM truck 2007 to 2013
Intake Manifold Throttle Cable Bracket for 6.2L L92 GM Truck TBSS NNBS - image 6
Intake Manifold Throttle Cable Bracket for 6.2L L92 GM Truck TBSS NNBS - image 7
Intake Manifold Throttle Cable Bracket for 6.2L L92 GM Truck TBSS NNBS - image 8
Intake Manifold Throttle Cable Bracket for 6.2L L92 GM Truck TBSS NNBS - image 9
Angled full unit black intake manifold throttle cable bracket for 6.2L L92 GM truck 2007 to 2013
Front view black intake manifold throttle cable bracket for 6.2L L92 GM truck 2007 to 2013
Installation kit layout black intake manifold throttle cable bracket for 6.2L L92 GM truck 2007 to 2013
Included parts laid flat black intake manifold throttle cable bracket for 6.2L L92 GM truck 2007 to 2013
EGR Performance black intake manifold throttle cable bracket for 6.2L L92 GM truck 2007 to 2013
Intake Manifold Throttle Cable Bracket for 6.2L L92 GM Truck TBSS NNBS - image 6
Intake Manifold Throttle Cable Bracket for 6.2L L92 GM Truck TBSS NNBS - image 7
Intake Manifold Throttle Cable Bracket for 6.2L L92 GM Truck TBSS NNBS - image 8
Intake Manifold Throttle Cable Bracket for 6.2L L92 GM Truck TBSS NNBS - image 9

Intake Manifold Throttle Cable Bracket for 6.2L L92 GM Truck TBSS NNBS

$22.08
Shipping calculated at checkout.
30 in stock, ready to ship
🛒 Bulk Discount: Save 6% on 2+ Items
🎁 Special Offer: Enjoy 10% Off on 3+ Items
📞 Large Orders (10+): Contact Us for Exclusive Deals
Details
Brand Model Year Engine Model
for GM GMT800 truck platform VIN verification required TBSS NNBS L92 style intake manifold
for GM Restomod LS swap applications Custom build Aftermarket throttle cable compatible

✅ Exact Fitment Guarantee | If you are unsure about compatibility, contact us at service@egrperformance.com with your VIN.

Intro Section

  • Intake manifold throttle cable bracket helps correct cable tension variance.
  • Built for for GM GMT800 truck platform and L92 style intake setups.
  • 5 piece kit includes 1 bracket, 2 screws, and 2 spacers.
  • Review fitment, installation, and package details before ordering.
Shipping Details

Ontario CA / Springdale OH / Newark NJ
Package List

Complete Package Contents

  • 1 xIntake manifold throttle cable bracket.
  • 2 xMounting screws.
  • 2 xSpacers.
Delivery Time

2-5 working days inland in the United States

Product details

x-tinymce/html

Product Overview

  • Product type:Intake manifold throttle cable bracket.
  • Main function:Supports throttle cable position and cable tension.
  • Application:for GM truck TBSS NNBS L92 style intake setups.
  • Use case:GMT800 truck platform and LS swap cable applications.
  • Finish:Satin black powder coat.

Ideal For

  • GMT800 cable setup:Solve throttle cable mounting position issues.
  • L92 style intake swap:Solve missing cable bracket concerns.
  • Restomod LS swap:Solve aftermarket cable support problems.
  • Cruise control retention:Solve GMT800 cruise cable routing needs.

Technical Specifications

  • Brand:EGR Performance.
  • Product type:Intake Manifold Throttle Cable Bracket.
  • Color:Black.
  • Finish:Satin black powder coat.
  • Material:Cast iron.
  • Placement on vehicle:Front.
  • Fitment type:Performance custom.
  • Universal fitment:No.
  • Modified item:No.
  • Custom bundle:No.
  • Reference number:replacement for 257403.
  • Factory reference:replacement for TBSS NNBS L92.
  • Fuel type field:Diesel.
  • Engine size field:61 in³.
  • Measurement note:Manual measurement variance is 1 to 3 mm.

Why Choose EGR Performance

  • Fitment Support:Solve buyer uncertainty with VIN email checks.
  • Warranty Support:Solve defect concerns with 1 Year Limited Warranty.
  • Clear Contents:Solve missing part concerns with 5 listed pieces.
  • US Buyer Service:Solve support needs at service@egrperformance.com.
  • After Sales:1 Year Limited Warranty against manufacturing defects.

Installation Information

Installation Difficulty Level

Moderate

Estimated Installation Time

1-2 hours

Required Tools

  • Socket set.
  • Combination wrench set.
  • Screwdriver set.
  • Torque wrench.
  • Throttle cable adjustment tool if required.

Step-by-Step Installation Overview

  • Confirm intake manifold and cable layout before installation.
  • Position the bracket on the intake manifold mounting area.
  • Install the screws and spacers supplied in the kit.
  • Adjust throttle cable tension and verify smooth cable travel.
  • Check cruise control cable routing if used.

No printed instructions included. Professional installation is highly recommended. For technical support, contact service@egrperformance.com.

Troubleshooting and Problem Solving

Common Issues After Installation

  • High idle:Cable tension may be too tight.
  • Low throttle response:Cable tension may be too loose.
  • Sticky pedal:Cable path may be bent or misaligned.
  • Cruise control issue:GMT800 cruise cable may need rerouting.
  • Bracket movement:Screws may need proper tightening.

Error Code Solutions

  • No listed DTC:No input verified diagnostic code is tied to this bracket.
  • Throttle related DTC:Inspect cable travel and connector routing.
  • Idle related DTC:Recheck cable tension and throttle blade return.

How to Reset Check Engine Light After Installation

  • Repair the cable issue before clearing any code.
  • Use an OBD2 scanner to read stored codes.
  • Clear codes only after the throttle moves freely.
  • Road test and confirm the light stays off.

What to Do If Your Vehicle Loses Power After Installation

  • Stop driving and inspect throttle cable movement.
  • Check that the bracket is not pulling the cable open.
  • Verify the cable is not kinked or trapped.
  • Confirm all screws and spacers are seated correctly.
  • Contact service@egrperformance.com with VIN details.

Core Advantages

  • 5 Piece Kit:Includes 1 bracket, 2 screws, and 2 spacers.
  • Cable Tension Adjustment:Supports tension variance using 1 bracket.
  • Black Finish:Uses 1 satin black powder coated bracket.
  • Non Universal Fit:Universal fitment listed as No for fitment control.
  • Warranty Coverage:Includes 1 Year Limited Warranty support.

Complete Package Contents

  • 1 xIntake manifold throttle cable bracket.
  • 2 xMounting screws.
  • 2 xSpacers.

Long-Term Maintenance Tips

  • Cable Tension:Inspect every oil change to prevent high idle.
  • Bracket Fasteners:Inspect every 3 months to prevent movement.
  • Cable Routing:Inspect after service to prevent binding.
  • Finish Condition:Inspect every 6 months to monitor coating wear.
  • Cruise Cable Path:Inspect after installation to prevent interference.

x-tinymce/html

Vehicle Fitment

  • Fits stated application for GM GMT800 truck platform.
  • Fits stated application for GM TBSS NNBS L92 style intake setup.
  • Can be used in restomod LS swap applications with aftermarket cables.
  • Universal fitment is listed as No.
  • Not confirmed for vehicles outside the stated platform and setup.
  • For fitment help, email VIN to service@egrperformance.com.
  1. Dispatch Time: Orders will be shipped within 24 hours after successful payment.
  2. Delivery Time: 2-5 business days after dispatch (delivery speed depends on proximity to warehouse location).
  3. Return Window:7 days for unsatisfactory items45 days for quality-related issues
  4. Refund Processing: Refunds will be processed back to your original payment method within 2-4 business days after receiving the automated refund confirmation email (subject to bank verification).

x-tinymce/html

Will this fit my GM truck?

This bracket is listed for GM GMT800 truck platform and TBSS NNBS L92 style setups. Email your VIN for confirmation.

Is this bracket for an L92 style intake manifold?

Yes. The input fitment reference lists TBSS NNBS L92 style intake manifold applications.

Does this work with GMT800 cruise control?

Yes. The input description states compatibility with GMT800 cruise control.

Can I use it for an LS swap?

Yes. It can be used with aftermarket cables in restomod and LS swap applications.

Is this a universal throttle cable bracket?

No. Universal fitment is listed as No, so fitment should be checked before ordering.

What comes in the package?

The package includes 1 bracket, 2 screws, and 2 spacers.

Are installation instructions included?

No printed instructions are included. Professional installation is highly recommended.

What color is the bracket?

The bracket is black with a satin black powder coat finish.

What material is listed for this bracket?

The listed material is cast iron.

Does it include mounting hardware?

The package list includes 2 screws and 2 spacers.

How long does installation take?

Estimated installation time is 1 to 2 hours for a qualified installer.

What if my throttle cable feels too tight?

Recheck bracket position and reduce cable tension before driving.

What if my throttle pedal sticks?

Inspect cable routing, bracket alignment, and throttle return movement immediately.

Can this cause a check engine light?

A bracket issue can affect cable movement, but no specific DTC is verified by the input data.

What warranty is included?

EGR Performance includes a 1 Year Limited Warranty against manufacturing defects.

How do I verify fitment before purchase?

Email service@egrperformance.com with your VIN and vehicle details.