Oil Fuel Filter Kit With Cap for 6.0L Powerstroke Ford F250 F350 (2003-2007)

Vehicle Fitment Description

This EGR Performance oil fuel filter kit with cap is designed as a direct replacement for 2003 to 2007 Ford F250 F350 F450 Super Duty and 2003 to 2005 Ford Excursion models equipped with the 6.0L Powerstroke Diesel engine, delivering reliable filtration performance for your diesel vehicle.

Compatible Vehicle Trim & Configuration Details

• Compatible with all 2WD and 4WD trim levels for Ford F250 F350 F450 Super Duty 2003 to 2007
• Compatible with all 2WD and 4WD trim levels for Ford Excursion 2003 to 2005
• Not compatible with gasoline engine models or vehicles modified with non-OEM fuel system components

For 100% fitment confirmation, please send your VIN number to service@egrperformance.com

EGR Performance Oil Fuel Filter Kit With Cap for 6.0L Powerstroke Diesel Fordis a direct replacement filter set designed specifically for your 2003 to 2007 Ford Super Duty truck, offering premium filtration to protect your engine and extend its lifespan. Keep reading to learn more about this high-quality replacement part.

x-tinymce/html

What is included in this 6.0L Powerstroke filter kit?

This complete kit includes 1 fuel filter set, 1 oil filter, and 1 oil filter cap. The fuel filter set comes with the large filter, small filter, and 2 black O-rings. The oil filter also includes its own O-ring seal. Everything you need for a full filter service on your 6.0L Powerstroke is included.

Will this fit my 2004 F250 6.0L Powerstroke?

Yes, this oil and fuel filter kit fits the 2004 Ford F-250 Super Duty 6.0L Powerstroke diesel. It also fits all 2003–2007 F250, F350, and F450 Super Duty models with the 6.0L engine.

Does this fit the 2005 Excursion 6.0L?

Yes, this kit is compatible with the 2005 Ford Excursion 6.0L Powerstroke diesel. It covers all Excursion models from 2003 through 2005 equipped with the 6.0L engine.

What part numbers does this kit replace?

The oil filter replaces FL2016. The fuel filter replaces FD4616, FD4604, and 3C3Z9N184CA. All filters are direct cross-reference replacements for the factory Motorcraft parts.

Does the fuel filter set include both upper and lower filters?

Yes, the fuel filter set includes both the large (upper) fuel filter and the small (lower) fuel filter. It also comes with 2 black O-rings for a complete, leak-free installation. You won't need to purchase anything separately for your fuel filter service.

Does the oil filter come with a cap?

Yes, this kit includes 1 oil filter cap along with the oil filter. The cap is a direct replacement for the factory plastic oil filter cap on 6.0L Powerstroke engines. It's a common wear item that often cracks over time.

How often should I change fuel filters on a 6.0L Powerstroke?

Ford recommends changing the fuel filters every 15,000 miles on the 6.0L Powerstroke. For trucks that see heavy towing or use lower-quality fuel, change them every 10,000 miles. Clean fuel filters protect your expensive fuel injectors from contamination.

How often should I change the oil filter on a 6.0L?

Change the oil filter every 5,000 miles under normal driving conditions. For severe duty like towing or heavy hauling, change it every 3,000 miles. Always replace the oil filter at every oil change.

What are the signs of a clogged fuel filter on 6.0L Powerstroke?

Common symptoms include hard starting, loss of power, rough idle, poor fuel economy, and stalling under load. If your F350 6.0L struggles to maintain speed uphill or hesitates during acceleration, clogged fuel filters are a likely cause.

Can a bad oil filter cap cause oil leaks?

Yes, a cracked or stripped oil filter cap is a common source of oil leaks on the 6.0L Powerstroke. The plastic cap becomes brittle from heat cycles and can crack, causing oil to seep out around the filter housing. Replacing the cap during your next oil change prevents this issue.

Do I need any special tools to install these filters?

You'll need a 32mm or 1 1/4" socket for the oil filter cap, a fuel filter cap wrench, and basic hand tools. A drain pan and rags are also recommended. No specialty tools are required beyond standard sockets and a torque wrench.

How do I replace the fuel filters on a 6.0L Powerstroke?

First, relieve fuel pressure and drain the fuel from the filter housings. Remove the upper and lower fuel filter caps, then pull out the old filters. Install the new filters with fresh O-rings lubricated with clean diesel fuel. Torque the caps to spec and prime the system before starting.

Is this compatible with Motorcraft FD4616?

Yes, the fuel filters in this kit are direct replacements for Motorcraft FD4616 and FD4604. They meet the same filtration standards and fit all the same 6.0L Powerstroke applications. It's a cost-effective alternative to dealer parts.

Will this kit void my engine warranty?

No, replacing filters with aftermarket equivalents does not void your warranty under the Magnuson-Moss Warranty Act. These filters meet or exceed OEM filtration specifications. Using quality replacement filters is part of normal maintenance.

What is the warranty on this filter kit?

This oil and fuel filter kit is backed by our quality guarantee against manufacturing defects. If you experience fitment issues or material defects, contact service@egrperformance.com for assistance. We stand behind every kit we sell.

How long does shipping take?

Orders placed before 2 PM EST typically ship the same business day from our USA warehouse. Standard shipping takes 3–7 business days within the continental US. Expedited options are available at checkout for faster delivery.

Can I return this kit if it doesn't fit?

Yes, we accept returns within 30 days of purchase for unused products in their original packaging. If you're unsure about fitment for your 6.0L Powerstroke, email us your VIN first. Contact service@egrperformance.com to initiate a return.