23128692 Tailgate Handle Backup Rear View Camera for 2014-2020 Chevy Silverado and GMC Sierra Tailgate Tail Black Backup

- The rear fender handle looks, matches, and works just like the original part. It comes with a rear door handle latch with a lever clip and bezel, so you can just replace your old rusty tailgate handle without the hassle of opening and closing it, making it super easy to make it look new and work again!only takes a few minutes to install

Installation Steps
1.Locate the Backup Light, use Volt Meter to identify the Power and Ground wires and make sure the voltage is 12V.
2.Refer to the above diagram, connect the power wires of the extension cable to the backup light (Red: 12V, Black: Ground).
3.To confifirm everything is working before the installation:
A Connect the Yellow RCA connector of the extension cable to the front Display Monitor RCA video input,
B Align the Arrows on the Black Connector of the camera ana the Extension Cable, push tightly to connect.
C Start the vehicle and place the gear on Reverse, verify that the camera video display on the monitor.
4.Remove the tailgate plate, nuts and release both rods, save these parts for reuse.Remove tailgate handle. Install the new tailgate handle using the original rods and nuts.
5.Route the camera extension harness from tailgate to front monitor display. Make sure not to pinch the cable.Use Split Loom Tubing to protect the wire if needed.
6.The Red wire on the RCA connector is the power source from the backlight,it is the optional power source to power up the display if needed.Use the electrical tape to seal the connections.
7.Final check the image when backup. Installation Tips: Search YouTube for "tailgate handle camera installation" for instruction video.

RETURN POLICY - 45-DAY RETURN & REFUND GUARANTEE

At egrperformance, we strive for your complete satisfaction with every purchase. If you are not entirely satisfied, you may return any unused product within 45 days of the delivery date for a full refund. Kindly ensure that the item remains in the same condition as when you initially received it.

To facilitate a seamless return process, kindly adhere to the following guidelines:

1. Original Packaging: Ensure returned items are enclosed in their original packaging, including all boxes, plastic containers, bags, and equivalent protective materials.

2. Undamaged Condition: We cannot accept original packaging that has been damaged, as these items are no longer considered new.

3. Tags and Additional Components: The original packaging must also include all tags, information booklets, instructions, stickers, etc. For apparel, please ensure tags remain attached.

4. Secure Packing: Pack your returns firmly to prevent any damage in transit.  If we receive a damaged item, we cannot determine the cause of the damage and will not accept it as a return.5. Shipping Container: Avoid using the item's original packaging as the shipping container. Instead, place items in the original packaging inside a larger, separate shipping box. We recommend reusing the box your items were initially shipped in.6. Necessary Information: Remember to include the original invoice or other essential contact information with your return.7. Confirmation Process: Before returning items, make sure all return conditions are met. Take photos or videos and send them to our customer service team for confirmation. Once approved, ship the products promptly and provide our team with a valid tracking number. We will process the refund within three working days after receiving the item, we will not deduct any fees, full refund, The refund is expected to arrive within 1 working day after the refund is processed.

NOTE:

CUSTOMER SERVICE EMAIL: EGRBETTER@HUANGZHU.WORK

Please make sure to include a note with your order number (e.g., KE-XXXX) inside the package before sending it for delivery.

EXCEPTIONS AND EXPLANATIONS

EXCHANGES

For a quicker exchange process, we recommend returning the item you wish to exchange and then placing a separate order for the desired new item..

Shipping Fee

If you want to return or exchange an item with no quality issues, you will be responsible for paying the return shipping fee. Please note, if the purchased part does not fit due to failure in checking the Fitment information carefully, you will also bear the cost of return shipping. We do not charge for re listing fees. However, if we provide incorrect Fitment information, we will bear the cost.

Product Issues

If you receive an incorrect item or the product has quality issues, we will process exchange or return requests within 3 business days. Since it is our fault, we will bear the cost of returning the goods. However, please follow the return standards to ensure that the items are in new condition and do not affect their resale.

Out-of-Stock Items

In case the product you ordered cannot be delivered on time due to inventory shortages, we will contact you via email. You may choose to wait for the stock to arrive or request a refund.

In case your specific situation falls outside the scope of the policy mentioned above, please do not hesitate to contact us. We will make every effort to support you in resolving the issue.