Truck Bed Mounting Hardware Kit for Ford F150 Lobo Lincoln Mark LT 1997 2012

$49.79
Shipping calculated at checkout.
30 in stock, ready to ship
🛒 Bulk Discount: Save 6% on 2+ Items
🎁 Special Offer: Enjoy 10% Off on 3+ Items
📞 Large Orders (10+): Contact Us for Exclusive Deals
Details

Intro Section

  • Truck bed mounting hardware kit replaces missing or corroded bed fasteners.
  • Fits for Ford F-150, Ford Lobo, and Lincoln Mark LT pickup applications.
  • Includes 6 bolts, 6 washers, and 6 captured nuts for one kit service.
  • Review the full fitment table, specifications, and installation notes before ordering.
Brand Model Year Engine Model
Ford F-150 1997-2012 Not engine specific
Ford Lobo Pickup 1997-2012 Not engine specific
Lincoln Mark LT Pickup 2006-2008 Not engine specific

✅ Exact Fitment Guarantee | If you are unsure about compatibility, contact us at service@egrperformance.com with your VIN.

Shipping Details

Ontario CA / Springdale OH / Newark NJ

Package List

Complete Package Contents

  • 6truck bed mounting bolts.
  • 6truck bed mounting washers.
  • 6captured nuts.
  • 1truck bed mounting bolt kit.
Delivery Time

2-5 working days inland in the United States

Product details

x-tinymce/html

Product Overview

  • Truck bed mounting hardware kitfor pickup bed attachment service.
  • Designed as adirect replacementhardware set.
  • Steel construction with silver polished finish.
  • Rust resistant coating listed in the source product data.
  • Non-OEM accessory part from EGR Performance.

Ideal For

  • [Bed Removal Service]: Solve missing truck bed bolt hardware.
  • [Corrosion Repair]: Solve rusted or damaged bed mounting bolts.
  • [Bed Reinstallation]: Solve incomplete bed mounting fastener sets.
  • [Direct Replacement]: Solve fitment needs tied to listed reference numbers.

Technical Specifications

  • Product Type:Truck bed mounting hardware kit.
  • Brand:EGR Performance.
  • Condition:New.
  • Material:Steel.
  • Color:Silver tone.
  • Finish:Polished.
  • Fitment Type:Direct replacement.
  • Attachment Type:Bolts.
  • Bolt Size:M14x2.0.
  • Bolt Total Length:123 mm, 4.84 in.
  • Nut Internal Thread Size:12 mm, 0.47 in.
  • Nut Pitch:2.0.
  • Washer Size:18 mm ID, 40 mm OD.
  • Reference:replacement for 924-313 and 924313.
  • Reference:replacement for W708605-S436 and W708605S436.
  • Reference:replacement for W709424-S901 and W709424S901.
  • Universal Fitment:No.
  • Vintage Part:No.
  • Warranty:1 Year Limited Warranty against manufacturing defects.

Why Choose EGR Performance

  • [Fitment Support]: Solve compatibility questions by VIN email check.
  • [USA Stock]: Solve delivery concerns with Fast USA Warehouse Shipping.
  • [Warranty Coverage]: Solve defect concerns with1 Year Limited Warranty.
  • [Direct Data]: Solve part matching with listed replacement reference numbers.

Installation Information

Installation Difficulty Level

Moderate

Estimated Installation Time

1-2 hours

Required Tools

  • Socket set.
  • Ratchet.
  • Torque wrench.
  • Penetrating oil for rusted fasteners.
  • Vehicle-safe lifting or support equipment when needed.

Step-by-Step Installation Overview

  • Park the truck on a level surface.
  • Remove damaged or missing bed mounting hardware.
  • Align the truck bed mounting holes.
  • Install bolts, washers, and captured nuts.
  • Torque all fasteners to vehicle service specifications.

No printed instructions included. Professional installation is highly recommended. For technical support, contact service@egrperformance.com.

Troubleshooting and Problem Solving

Common Issues After Installation

  • [Bed Shift]: Mounting holes were not aligned before tightening.
  • [Bolt Binding]: Threads were started at an angle.
  • [Noise From Bed]: Hardware may not be tightened to service specification.
  • [Rust Seizure]: Old fasteners may require penetrating oil before removal.

Error Code Solutions

  • [No DTC]: Truck bed mounting hardware does not connect to the ECU.
  • [Existing DTC]: Scan the vehicle because the code is unrelated to this kit.

How to Reset Check Engine Light After Installation

  • This hardware should not trigger a check engine light.
  • Scan for stored codes if the light is already on.
  • Repair the unrelated system shown by the scan tool.
  • Clear codes only after the actual fault is corrected.

What to Do If Your Vehicle Loses Power After Installation

  • Truck bed mounting hardware is not an engine control component.
  • Check for unrelated fuel, ignition, air, or sensor faults.
  • Inspect wiring that may have been disturbed during bed service.
  • Use a scan tool before replacing unrelated parts.

Core Advantages

  • [6-Bolt Kit]: Provides6 boltsfor bed mounting service.
  • [Complete Washer Set]: Includes6 washersfor paired installation.
  • [Captured Nut Set]: Includes6 captured nutsfor matched hardware.
  • [M14x2.0 Bolt Spec]: UsesM14x2.0bolt sizing from source data.
  • [123 mm Bolt Length]: Provides123 mmtotal bolt length.

Complete Package Contents

  • 6truck bed mounting bolts.
  • 6truck bed mounting washers.
  • 6captured nuts.
  • 1truck bed mounting bolt kit.

Long-Term Maintenance Tips

  • [Bolt Check]: Inspect every 12 months and retighten if loose.
  • [Washer Check]: Inspect during bed service to prevent uneven seating.
  • [Rust Check]: Inspect yearly and clean corrosion from mounting points.
  • [Thread Check]: Inspect during removal to prevent cross-thread damage.

x-tinymce/html

Vehicle Fitment

  • Fits for1997-2012 Ford F-150.
  • Fits for1997-2012 Ford Lobo Pickup.
  • Fits for2006-2008 Lincoln Mark LT Pickup.
  • Not listed as universal fitment.
  • Not verified for models outside the listed fitment range.
  • Send your VIN to service@egrperformance.com before ordering if unsure.
  1. Dispatch Time: Orders will be shipped within 24 hours after successful payment.
  2. Delivery Time: 2-5 business days after dispatch (delivery speed depends on proximity to warehouse location).
  3. Return Window:7 days for unsatisfactory items45 days for quality-related issues
  4. Refund Processing: Refunds will be processed back to your original payment method within 2-4 business days after receiving the automated refund confirmation email (subject to bank verification).

x-tinymce/html

Will this truck bed mounting hardware kit fit for Ford F-150?

Yes. It is listed for 1997-2012 Ford F-150 applications.

Will this kit fit for Ford Lobo Pickup?

Yes. It is listed for 1997-2012 Ford Lobo Pickup applications.

Will this kit fit for Lincoln Mark LT Pickup?

Yes. It is listed for 2006-2008 Lincoln Mark LT Pickup applications.

Does this kit fit every truck bed?

No. The source data lists universal fitment as no.

Is this an OEM factory part?

No. This is a non-OEM accessory part from EGR Performance.

Which reference numbers does this kit replace?

It is replacement for 924-313, 924313, W708605-S436, and W709424-S901.

How many bolts are included?

The kit includes 6 truck bed mounting bolts.

How many washers are included?

The kit includes 6 truck bed mounting washers.

How many captured nuts are included?

The kit includes 6 captured nuts.

What material is the hardware made from?

The source product data lists the material as steel.

What is the bolt size?

The bolt size is M14x2.0.

What is the bolt total length?

The bolt total length is 123 mm or 4.84 in.

What is the washer size?

The washer size is 18 mm ID and 40 mm OD.

Are printed installation instructions included?

No printed instructions are included. Professional installation is recommended.

Do I need special tools?

The source data states no special tools are necessary.

Can I verify fitment before buying?

Yes. Email your VIN to service@egrperformance.com for fitment support.

What warranty is included?

This product includes a 1 Year Limited Warranty against manufacturing defects.