How the DPF Delete Affects Your Powerstroke's Performance
Stock DPF systems act as a "choke point" for your Powerstroke's potential. They increase backpressure, raise Exhaust Gas Temperatures (EGTs), and trigger frequent Regen cycles that burn extra fuel while sapping power.
A stock PowerStroke DPF system often leads to sluggish throttle response and delayed spooling under heavy towing. By installing a 6.7 or 6.4 PowerStroke DPF delete, you eliminate these restrictions.
Real-world results show up to +60 HP, +120 lb-ft of torque, and 2–4 MPG gains. Your truck breathes freely, tows stronger, and runs cooler without the constant threat of "Limp Mode."
DPF Delete Pipe and Bundles for Your Powerstroke
1. Core EGR & DPF Hardware (The Essentials)
- DPF Delete Pipe: A straight-through Powerstroke DPF delete pipe that replaces the factory canister for immediate flow improvement.
- CAT & DPF Delete Pipe: Ideal for DPF cat delete Powerstroke builds, removing both restrictions for maximum efficiency.
- 4-Inch vs 5-Inch Systems: 4" for refined daily driving; 5" for towing and max output on 6.7/6.4 Powerstroke DPF delete pipe setups.
All kits use mandrel-bent tubing for optimal flow and durability, with muffler or no-muffler options for your desired sound.
2. Performance Combinations (Specialised Bundles)
- DPF / Tuner Combination: Required for every DPF delete. The PowerStroke DPF delete programmer shuts off sensors to prevent dash lights.
- DPF / EGR / Tuner (The Gold Standard): Our most popular Powerstroke DPF EGR delete tuner package, covering intake, exhaust, and software.
3. "Ultimate" Master Kits (The Professional Stage 3)
The DPF / EGR / CCV / Tuner kit is the "Longevity King" for 6.7 L Powerstroke DPF owners, adding a CCV Reroute/Delete for 6.7 Powerstroke to keep the turbo free of oily mist.
It is a complete 6.7 Ford diesel delete solution. It addresses every bottleneck, from the exhaust velocity provided by a delete pipe for a 6.7/6.4 Powerstroke with an Up-Pipe to the software synchronisation of the best DPF delete tuner for Powerstroke.
Powerstroke DPF Delete Kits by Model & Year
EGR Performance provides tailored fitment for the entire F-series lineup:
- 6.7L Powerstroke (2011–2024): Options include a 4" or 5" 6.7 Powerstroke DPF delete pipe for F-250 to F-550. For 2022+ models, we offer specific 6.7 DPF delete tuner bundles for high-output engines. Choose between a standard pipe or a 6.7 Powerstroke delete pipe with muffler for a refined sound.
- 6.4L Powerstroke (2008–2010): Restore your F-250/F-350 with a 6.4 Powerstroke DPF delete kit to stop fuel dilution.
6.4/6.7 Powerstroke DPF Delete Installation Steps and Tips
Installing Powerstroke DPF delete hardware typically takes 2–4 hours with basic hand tools.
A DPF delete for Powerstroke involves removing the factory aftertreatment system (DPF and SCR) and replacing it with a straight-pipe or high-flow exhaust section. Proper sequencing between software and hardware is the most critical factor in a successful installation.
Phase 1: Software Configuration
- Pre-Tuning: You must flash the Engine Control Module (ECM) with a compatible delete-capable tune before removing any hardware. This prevents the vehicle from entering a non-start or limp mode once sensors are disconnected.
- Verification: Ensure the tuner has completed the write process and that no "Check Engine" lights are present regarding the software flash.
Phase 2: Removal of Factory Components
1. Soak Hardware
Apply a high-quality penetrating oil to the V-band clamp on the downpipe and the rear flange bolts. Let these soak for at least 30 minutes to reduce the risk of snapping studs.
2. Disconnect Sensors
Unplug all EGT (Exhaust Gas Temperature) sensors, NOx sensors, and the Urea (DEF) injector lines. If you plan to reuse sensors for the new pipe, remove them now using a 13mm or 14mm flare nut wrench. If not, secure the vehicle-side harnesses to the frame rail with zip ties.
3. Support and Unclamp
The factory DPF assembly is significantly heavy. Use a transmission jack to support the centre of the unit. Loosen the V-band clamp at the downpipe and the bolts at the rear muffler flange.
4. Isolate and Remove
Spray the rubber exhaust hangers with silicone lubricant. Slide the factory assembly out of the hangers and lower the jack carefully. Move the unit away from the work area.
Phase 3: Installing the DPF Delete Pipe
1. Pipe Prep
If your delete pipe has sensor bungs, install the required EGT sensors now. Use a small amount of copper anti-seize on the threads. If your tuning does not require sensors, ensure the provided bungs are plugged and tightened.
2. Hang the New Pipe
Lift the delete pipe into position and slide the metal rods into the factory rubber hangers. This will support the pipe's weight while you align the flanges.
3. Mate the Downpipe
Align the front flange of the delete pipe with the factory downpipe. Ensure the V-band seating surfaces are flush. Tighten the V-band clamp until secure, but avoid over-torquing, which can stretch the clamp.
4. Rear Connection & Clearance
Bolt the rear flange to the remaining exhaust system. Check the entire length of the pipe for clearance against the transmission crossmember and heat shields to prevent rattling.
5. Final Check
Start the engine and listen for exhaust leaks at the flanges. Perform a short test drive, then re-torque the V-band clamp and flange bolts once the metal has reached operating temperature and settled.
Notice: This modification is intended for off-road or competition use. Ensure you are familiar with local regulations regarding emissions equipment removal.
- Tip 1 (Tuning): Always install your 6.7/6.4 PowerStroke DPF delete tune before physically removing the pipes to ensure the ECU is ready.
- Tip 2 (Sensors): For PowerStroke DPF delete pipe installs, use penetrating oil on rusted EGT sensors 24 hours in advance to prevent breakage.
- Tip 3 (Hardware): Our Ford 6.7 L/6.4L DPF delete pipes are 100% bolt-on; keep your OEM parts in storage for potential future reinstallation.
Why Choose EGR Performance?
Unlike generic "race pipes," our best DPF delete kit 6.7/6.4 Powerstroke selections are backed by 20+ years of diesel performance data.
- Quality Assurance: We use mandrel-bent 409 or 304 stainless steel for every Ford Powerstroke delete pipe.
- Expert Support: Need help with a Ford programmer with DPF delete? Our U.S.-based techs are available 24/7.
- Real Results: Thousands of tuned and deleted 6.4 Powerstroke and 6.7L owners trust us for their F-250/F-350/F-450/F-550 performance upgrades.
Expert Note on DPF Regulations: All DPF deletes for Powerstroke are sold strictly for off-road, racing, or competition use. Check local laws before installing any PowerStroke DPF delete kits.
