EGR Simulator Eliminator / Block-Off Plate Kit for 70020 Long-Flange Ford Mustang, Bronco & F-150 (1973-1996)

$79.99
Shipping calculated at checkout.
295 in stock, ready to ship
🛒 Bulk Discount: Save 6% on 2+ Items
🎁 Special Offer: Enjoy 10% Off on 3+ Items
📞 Large Orders (10+): Contact Us for Exclusive Deals
Details
  •  Long-flange EGR delete kit — 6061 aluminum block-off plate, sealing gasket, and 3-pin EEC-IV EGR simulator for the original two-port EGR valve.
  • 3.25 in (3-1/4, ~82.5 mm) bolt center spacing — matches the Fel-Pro 70020 flange pattern.
  • 4.09 in overall length and 1.54 in width to cover the long two-port flange; 0.39 in thick solid plate.
  •  The 3-pin EGR simulator prevents EGR-related codes after the EGR valve is removed. Reuse the OEM mounting bolts.

Model

Engine

Years

Mustang / Mustang II

2.8L / 3.3L / 3.8L / 4.2L / 5.0L / 5.8L

1977-1995

Bronco

4.9L / 5.0L / 5.8L / 6.6L

1973-1989

Bronco II

2.8L V6

1984-1985

F-100 / F-150

3.8L / 4.2L / 4.9L / 5.0L / 5.8L / 6.6L / 7.5L

1973-1989

F-250 / F-350

4.9L / 5.0L / 5.8L / 6.6L / 7.5L

1973-1989

Econoline / Club Wagon

4.9L / 5.0L / 5.8L / 7.5L

1977-1989

Aerostar

2.8L V6

1986

Explorer

5.0L V8

1996

Country Squire / LTD CV / Thunderbird

5.0L V8

1987-1993


This EGR valve delete block-off plate kit is purpose-built for the long 3.25 in (Fel-Pro 70020) EGR flange found on Ford Mustang, Bronco, and F-150 gasoline engines. If your EGR valve is sticking, leaking, or throwing EGR flow codes, this solid 6061 aluminum plate removes the valve completely and seals the mounting surface flat, while the included 3-pin EEC-IV EGR simulator keeps the factory computer satisfied so no check-engine light returns.

The core advantage is simple: a clean, leak-free seal without a tuner. The 0.39 in thick plate covers the long two-port flange that the shorter 72649-style plate cannot reach, making it the correct choice for carbureted and early EFI 302, 351W, and 300 inline-six applications. Every kit is CNC machined, backed by a 1-year warranty, and shipped fast from a U.S. warehouse.

Below you will find the full fitment table, step-by-step installation overview, and a measurement check you can run in 30 seconds to confirm this is the right plate for your Ford. Keep reading to verify your exact year, model, and engine.


Shipping Details

Ontario CA / Springdale OH / Newark NJ

Package List

· 1x Long EGR block-off plate (70020 pattern)

· 1x EGR mounting gasket

· 1x 3-pin EEC-IV EGR simulator

· Mounting bolts not included; reuse the OEM EGR bolts.

Delivery Time

2-5 working days inland in the United States

Attention

Product details

Product Overview

· This EGR valve delete block-off plate kit removes the factory EGR valve from your Ford and seals the mounting port completely.

· It is built for the long two-port EGR flange (Fel-Pro 70020 pattern, 3.25 in bolt spacing) used on Ford Mustang, Bronco, F-series, and Econoline gas engines.

· The included 3-pin EEC-IV EGR simulator plugs into the factory harness so the computer keeps reading a normal EGR signal and does not turn on the check-engine light.

· A solid 6061 aluminum plate and gasket replace the leak-prone valve for a flat, permanent seal.

· It is designed for off-road and racing builds where the EGR system is no longer needed.

Ideal For

· Towing and Hauling: Removes a sticking or leaking EGR valve that causes ping and hesitation under load, helping the engine pull steadily with a sealed intake.

· Daily Driving: Smooths the rough idle and hesitation caused by a carbon-fouled EGR valve on older Ford trucks and Mustangs.

· Off-Road Use: Fully blocks the EGR port for trail and rig builds that run without emissions equipment.

· Commercial Vehicles: A practical fix for high-mileage work trucks and vans where repeated EGR valve replacement is costly.

· Engine Performance Upgrades: Pairs naturally with intake, exhaust, and carburetor upgrades as part of a complete EGR delete.

· Long-Term Vehicle Ownership: Eliminates a common failure point, cutting future EGR-related repairs and sensor costs.

Core Advantages

· Increased Horsepower and Torque: Restores throttle response and reduces EGR-induced detonation (pinging); no specific dyno figure is claimed.

· Improved Fuel Efficiency: A fully sealed intake prevents vacuum and exhaust leaks that hurt mileage; individual MPG results vary by build and tune.

· Reduced Engine Temperature: Removing EGR gas flow lowers intake charge temperature and the knock that comes with hot recirculated exhaust.

· Extended Engine Life: A clean, sealed intake reduces carbon buildup and oil contamination from a malfunctioning EGR valve.

· Direct Bolt-On Installation: CNC machined to the 70020 flange using the factory mounting points, with no welding or modification required.

· All-In-One Kit: Includes the plate, gasket, and 3-pin EGR simulator in one box, so no extra parts are needed (reuse your OEM bolts).

Technical Specifications

· Material: 6061-T6 aircraft-grade aluminum (plate)

· Finish: Precision CNC machined, natural aluminum

· Weight: Lightweight kit (plate + gasket + simulator)

· Dimensions: Plate 4.09 in long x 1.54 in wide x 0.39 in thick

· Bolt Center Spacing: 3.25 in (3-1/4, ~82.5 mm)

· Gasket Pattern: Fel-Pro 70020

· Simulator: 3-pin EEC-IV EGR simulator

· Warranty: 1 Year Limited Warranty against manufacturing defects

Why Choose EGR Performance

· Premium Quality Materials: Solid 6061 aluminum that will not warp or deform under heat.

· Precision Engineering: CNC machined for a flat mating surface and exact bolt alignment.

· Rigorous Testing: Parts are fit-checked against the long 70020 flange before they ship.

· Dedicated Customer Support: Email us at service@egrperformance.com

· Fast Shipping from USA Warehouse

· 1 Year Limited Warranty

Troubleshooting and Problem Solving

Common Issues After Installation

· Check Engine Light: Usually means the simulator is not fully seated or the harness is loose.

· Rough Idle: Check for a vacuum or exhaust leak at the plate or a damaged gasket.

· Reduced Power: Verify the plate is not over-torqued and all connectors are seated.

· Exhaust Leaks: Re-torque the bolts and inspect the gasket for damage.

Error Code Solutions

· P0401: Insufficient EGR flow - expected after delete; confirm the simulator is connected, then clear the code.

· P0402: Excessive EGR flow - check the plate and gasket seal the port with no leak path.

· P0400: EGR flow malfunction - verify the simulator is plugged into the correct 3-pin connector.

· P0403: EGR circuit problem - inspect the simulator wiring and connector pins.

· P0405 / P0406: EGR sensor circuit low/high - reseat the simulator and check for bent pins.

How to Reset Check Engine Light After Installation

1. Confirm the simulator is connected and the plate is sealed.

2. Use an OBD2 scan tool to clear codes, or disconnect the negative battery terminal for 15 minutes.

3. Reconnect, start the engine, and let it idle to confirm the light stays off.

What to Do If Your Vehicle Loses Power After Installation

· Check that no vacuum lines were left unplugged during EGR removal.

· Inspect the plate and gasket for an exhaust leak.

· Confirm the simulator is fully seated in the factory connector.

· Verify the correct EGR flange (3.25 vs 2.875 in) was used.

Long-Term Maintenance Tips

· Regular Inspection: Every 5,000-10,000 miles, inspect the plate and gasket for exhaust soot or leaks.

· Routine Maintenance: Clean carbon or debris from the plate surface during routine service.

· Wear Parts Replacement: Replace the gasket if the plate is ever removed or the gasket shows damage.

· Hardware Check: At each oil change, confirm the mounting bolts stay tight and the simulator connector is secure.

· Storage Tips: Keep a spare plate in a dry place and avoid bending the gasket during storage.

· Warranty Reminder: Following these maintenance guidelines will keep your 1 Year Limited Warranty valid.

This kit fits the long 70020-flange EGR valve on Ford gasoline vehicles: Mustang (5.0L V8, 3.8L V6, 4.2L V8, 3.3L L6, 2.8L V6, 5.8L V8), Mustang II (2.8L V6, 5.0L V8), full-size Bronco (4.9L L6, 5.0L/5.8L/6.6L V8), Bronco II (2.8L V6), F-100/F-150/F-250/F-350 (4.9L, 5.0L, 5.8L, 6.6L, 7.5L), Econoline and Club Wagon (4.9L/5.0L/5.8L/7.5L), Aerostar 2.8L, 1996 Explorer 5.0L, Country Squire and LTD Crown Victoria 5.0L, and Thunderbird 5.0L.

No modification is required when the EGR valve uses the 3.25 in (70020) flange.

Exceptions: Does not fit the shorter 2.875 in (72649) flange - use EGR-029 instead. Does not fit 6.9L/7.3L IDI diesel engines, which have no EGR system. Because the same model can use either flange, measure the bolt center spacing (3.25 in vs 2.875 in) before ordering.

For 100% fitment confirmation, please send your VIN number to service@egrperformance.com

  1. Dispatch Time: Orders will be shipped within 24 hours after successful payment.
  2. Delivery Time: 2-5 business days after dispatch (delivery speed depends on proximity to warehouse location).
  3. Return Window:7 days for unsatisfactory items45 days for quality-related issues
  4. Refund Processing: Refunds will be processed back to your original payment method within 2-4 business days after receiving the automated refund confirmation email (subject to bank verification).

What is an EGR delete block-off plate?

It is a solid metal plate that replaces and seals off the factory EGR valve on your Ford. The included simulator keeps the computer from flagging the missing valve.

How does an EGR delete block-off plate work?

The plate bolts over the EGR mounting port using the factory holes, blocking exhaust gas from re-entering the intake. The 3-pin simulator sends a normal signal to the EEC-IV computer so no check-engine light appears.

What are the benefits of an EGR delete block-off plate?

It removes a common failure point, smooths rough idle and hesitation, and gives a clean, sealed intake. It also reduces EGR-related detonation and carbon buildup.

Will an EGR delete block-off plate void my warranty?

Installing aftermarket parts does not automatically void the vehicle warranty, and the part itself carries a 1-year limited warranty. Emissions-related modifications may affect coverage on emissions systems.

Is an EGR delete block-off plate legal in my state?

This kit is sold for off-road and racing use only and is not intended for emissions-controlled on-road vehicles. Always check your local and state emissions laws before installing.

Do I need a tuner for an EGR delete block-off plate?

No tuner is required on these EEC-IV Ford applications because the included 3-pin simulator satisfies the factory EGR signal. Install the plate and simulator, then clear any stored codes.

How much horsepower does an EGR delete block-off plate add?

It mainly restores throttle response and reduces ping rather than adding a fixed dyno number. Any power gain comes from removing a faulty valve and sealing the intake.

How much MPG gain can I expect from an EGR delete block-off plate?

Results vary by engine and tune; the kit prevents mileage loss from leaks but is not guaranteed to raise MPG. Most gains come from restoring a properly sealed intake.

How long does it take to install an EGR delete block-off plate?

Most installations take about 1-2 hours with basic hand tools. Access to the EGR valve is the main factor on vans and trucks.

Can I install an EGR delete block-off plate myself?

Yes, if you are comfortable removing the EGR valve and cleaning the mounting surface. The kit uses the factory mounting points with no welding.

How often should I maintain my EGR delete block-off plate?

Inspect the plate and gasket every 5,000-10,000 miles and keep the bolts tight. Replace the gasket if the plate is ever removed.

Will this EGR delete block-off plate fit my Ford Mustang, Bronco, or F-150?

It fits the long 3.25 in (70020) flange. Measure your bolt center spacing; if it is 2.875 in, order EGR-029 instead.

What is the warranty on this EGR delete block-off plate?

It includes a 1-year limited warranty against manufacturing defects. Contact service@egrperformance.com for warranty help.

Do you offer technical support?

Yes, email service@egrperformance.com with your questions or VIN and our team will help confirm fitment and installation.

How long does shipping take?

Orders ship fast from a U.S. warehouse, typically within 1-2 business days. Domestic delivery usually arrives within 3-7 business days.

Can I return this EGR delete block-off plate if it doesn't fit?

Yes, contact us with your order details and we will help with a return or exchange for the correct flange. Confirming the measurement before ordering helps avoid this.

Installation Difficulty Level

Moderate

Estimated Installation Time

1-2 hours

Required Tools

· Socket Set

· Torque Wrench

· Screwdrivers

· Pliers

· Gasket scraper / wire brush

Step-by-Step Installation Overview

1. Disconnect the EGR vacuum line and the 3-pin electrical connector, then unbolt the EGR valve from the intake manifold.

2. Clean the mounting surface and remove old gasket material and carbon.

3. Place the new gasket and block-off plate, then reinstall and torque the OEM bolts.

4. Plug the 3-pin EGR simulator into the factory harness and secure it away from heat.

5. Reconnect the battery, start the engine, and check for leaks or codes.

Important Note: No printed installation instructions are included. Professional installation is highly recommended. If you need technical support, please contact us at service@egrperformance.com.